Pages: [1]
Author Topic: ME7.x tyre size scalar  (Read 4333 times)
wreeve
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 23


« on: March 30, 2013, 07:16:04 AM »

Hi, I am battling to find the parameter which is used to calculate the road speed. This is of course based on the rolling radius of the tyres. I know this is stored somewhere but there are hundreds of parameters in the Damos file all in German! I suspect it's a scalar used on the speed pulse input.

Because the tyre size is incorrect in my tune the engine DME thinks the car is moving faster than it is at the moment. Not sure what effect this has apart from hitting the speed limiter sooner!

Can anyone tell me the register I need to look for please. I suspect ME7.1 is the same.
Logged
wreeve
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 23


« Reply #1 on: March 30, 2013, 07:49:04 AM »

found it! Under GGVFZG: Anzahl Geschwindigkeitsimpulse pro km für Normierung v-Signal
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #2 on: March 30, 2013, 09:34:32 AM »

http://s4wiki.com/wiki/Tuning#Wheel_speed_sensor
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
wreeve
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 23


« Reply #3 on: March 30, 2013, 12:11:46 PM »

Thanks. I had not seen that page before. The down side of getting the road speed correct is my car now does about 5mpg "less" !!!!
Logged
jaymemaurice
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #4 on: April 08, 2013, 06:46:25 PM »

Thanks. I had not seen that page before. The down side of getting the road speed correct is my car now does about 5mpg "less" !!!!

But you also aren't traveling as far/racking up the miles as fast Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)