Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Diagnostics
>
Compression Test
Pages: [
1
]
« previous
next »
Author
Topic: Compression Test (Read 9943 times)
vdubnation
Turboman
Global Moderator
Sr. Member
Karma: +49/-2
Offline
Posts: 433
Compression Test
« on: June 16, 2013, 09:23:54 AM »
hows this compression test look
Starting from cyl 1 to 6.
118,125,130,120, 125,145
Logged
QuattroEd
Newbie
Karma: +0/-0
Offline
Posts: 16
Re: Compression Test
« Reply #1 on: June 16, 2013, 11:33:21 AM »
how do the spark plugs look?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
Karma: +49/-2
Offline
Posts: 433
Re: Compression Test
« Reply #2 on: June 16, 2013, 12:29:36 PM »
Quote from: QuattroEd on June 16, 2013, 11:33:21 AM
how do the spark plugs look?
Pretty dry and clean
Logged
quattroGmbH
Jr. Member
Karma: +1/-0
Offline
Posts: 39
Re: Compression Test
« Reply #3 on: July 29, 2013, 09:36:24 PM »
What is the model of your car? 130psi is the spec wear limit for the 2.7t, unless you have compression lowering head gaskets those values are rather low.
«
Last Edit: July 29, 2013, 09:41:59 PM by quattroGmbH
»
Logged
Triangule
Newbie
Karma: +0/-0
Offline
Posts: 6
Re: Compression Test
« Reply #4 on: August 20, 2013, 10:55:59 PM »
How did you get this value ?
engine hot or cold ?
now you should add some oil in each cylinder and have a look if there any difference.
Logged
userpike
Hero Member
Karma: +22/-1
Offline
Posts: 763
Re: Compression Test
« Reply #5 on: August 20, 2013, 11:42:59 PM »
what is the compression spec for the motor?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
Karma: +49/-2
Offline
Posts: 433
Re: Compression Test
« Reply #6 on: August 21, 2013, 06:19:51 AM »
Found out the person doing the test didnt remove all the spark plugs a healthy motor should be around 160
Logged
Triangule
Newbie
Karma: +0/-0
Offline
Posts: 6
Re: Compression Test
« Reply #7 on: August 21, 2013, 11:17:35 PM »
have a look if you have some external oil leak.
Also start your engin and put your finger at the top of the tube where you check the oil level.
if you have some air pressure, this is not a good sign.
When an engin is losing is compression, the pressure on the top of the piston will go under it, this is killing step by step the gasket and different oil leakage are apparing.
if you add some oil inside the compression chamber and redo the compression test, the oil will help to seal and if the compression rise, then you have the answer to your question.
When you make the test also you need to defind if the leakage is coming from worn valves seats or piston rings. this could have closes effect with the compression gauge.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 26, 2024, 11:17:25 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
