Pages: [1]
Author Topic: me 7.5 how to calculate boost?  (Read 977 times)
banataremaps
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 7


« on: April 27, 2024, 03:14:31 AM »

Hello, Can someone explain to me how to convert this chart to millibars or how to calculate how much 1900 millibars is on this map.

Thanks in advance.
Logged
James1
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #1 on: April 30, 2024, 02:46:29 AM »

Assuming 1000mbar atmospheric pressure

1.8594=1859mbar absolute pressure = 859mbar of boost
Logged
Fabioo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 51


« Reply #2 on: April 30, 2024, 01:21:04 PM »

Assuming 1000mbar atmospheric pressure

1.8594=1859mbar absolute pressure = 859mbar of boost
according to this,maybe try to change factor to (x * 1000 - 1000) and the maps will appear in boost pressure  Roll Eyes
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: April 30, 2024, 02:33:18 PM »

pressure ratio isn't exactly boost either folks.

https://s4wiki.com/wiki/Compressor_map#Pressure_Ratio

Please learn the basics.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
James1
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #4 on: May 01, 2024, 12:36:08 PM »

Assuming 1000mbar atmospheric pressure

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 17 queries. (Pretty URLs adds 0s, 0q)