After bench flash no start

Pages: [1]

« previous next »

Author

Topic: After bench flash no start (Read 5351 times)

ratherb1

Full Member

Karma: +5/-5
Offline

Offline

Posts: 115

	After bench flash no start « on: February 10, 2014, 03:30:13 PM »

So I bought an ecu 4b0 907 551 t ( 2001 audi a6 ) about a week ago ...and after flash via galletto there is no start just crank and cranks ......( flashing s4 file ) .i did leave the key on position for like 1-2 minutes and tried again but no go .....so just 2 quick questions

1) after galletto writes 100% should I just ignore the commands ( don't know what they say) and keep continuing?
2) is there something else I need to after I install newly flashed ecu?


	Logged

-ROMIE

ddillenger

Hero Member

Karma: +640/-21
Offline

Offline

Posts: 5640

	Re: After bench flash no start « Reply #1 on: February 10, 2014, 03:53:36 PM »

You should always bootmode flash if you are changing software (IE A6 4B0907551A to S4 8D0907551M).

Try that, it should come back to life.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

ratherb1

Full Member

Karma: +5/-5
Offline

Offline

Posts: 115

	Re: After bench flash no start « Reply #2 on: February 10, 2014, 04:01:43 PM »

Quote from: ddillenger on February 10, 2014, 03:53:36 PM

You should always bootmode flash if you are changing software (IE A6 4B0907551A to S4 8D0907551M).

Try that, it should come back to life.

We'll the ecu I got is the same part number as mine .....(4b0 907 551 t).....I'm using an L box (s4 flash) for my t box 2001 a6 tip .....
So I galletto flash, disconnect, go to car install, and car just cranks

Sorry if I misunderstood but what do you want me to try ?


« Last Edit: February 10, 2014, 04:04:02 PM by ratherb1 »	Logged

-ROMIE

ddillenger

Hero Member

Karma: +640/-21
Offline

Offline

Posts: 5640

	Re: After bench flash no start « Reply #3 on: February 10, 2014, 04:14:59 PM »

You are putting L-box software on an A6 551T....

That is the very definition of changing software Sad

Bootmode flash it.


	Logged

ratherb1

Full Member

Karma: +5/-5
Offline

Offline

Posts: 115

	Re: After bench flash no start « Reply #4 on: February 10, 2014, 06:52:22 PM »

I am boot mode flashing ......using galletto , maybe I'll try to flash back a stock file an immo off it


	Logged

-ROMIE

ddillenger

Hero Member

Karma: +640/-21
Offline

Offline

Posts: 5640

	Re: After bench flash no start « Reply #5 on: February 10, 2014, 06:53:50 PM »

Does the ecu have a stock chip? Can you connect with VCDS?


	Logged

ratherb1

Full Member

Karma: +5/-5
Offline

Offline

Posts: 115

	Re: After bench flash no start « Reply #6 on: February 10, 2014, 07:22:02 PM »

Yes stock .....


	Logged

-ROMIE

_nameless

Hero Member

Karma: +338/-465
Offline

Offline

Posts: 2785

	Re: After bench flash no start « Reply #7 on: February 12, 2014, 05:27:49 AM »

the command at the end of galletto says turn key off for 10 sec


	Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/

ratherb1

Full Member

Karma: +5/-5
Offline

Offline

Posts: 115

	Re: After bench flash no start « Reply #8 on: February 12, 2014, 07:32:08 PM »

Quote from: darkshado87 on February 12, 2014, 05:27:49 AM

the command at the end of galletto says turn key off for 10 sec

I don't have a key since it's on a bench .....all I did was hit okay waited and turned the power supply off ..... Idk I'll try an ori file and immo off it see if that works


	Logged

-ROMIE

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

September 24, 2024, 01:35:41 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search