Pages: [1]
Author Topic: Updatet with maps, still woundering on load axis  (Read 4723 times)
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« on: May 06, 2014, 11:20:15 AM »

Can someone help me find load axis on this,
I guess KFZWOP  ignition maps uses same load axis

129F6 is KFMIOP

4B0906018AL

I will post tune file when i am ready and happy with tune Wink
« Last Edit: May 06, 2014, 01:39:31 PM by Iaus » Logged
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #1 on: May 06, 2014, 11:47:53 AM »

I have made it,, I was on the wrong axis,,,,  Shocked
So did not get it to match....

12B58 
Logged
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #2 on: May 06, 2014, 01:41:39 PM »

This are the maps i have,

Still missing correct load on KFZW,  If you see any other clear mistakes please let me know.
Logged
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #3 on: May 07, 2014, 10:16:34 AM »

This file gives ca260hp  160g/s maf readings.
But to much retarsds on chanal 20 vagcom

Hoping for some comments and maybe a tip on axis
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: May 07, 2014, 10:20:04 AM »

Which axis do you need?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #5 on: May 07, 2014, 10:26:55 AM »

missing load and rpm on KFZW and KFZW2

I think i have correct on KFZWOP
And when logging load it is vagcom dont give my higher then 16x load.  So i am missing a load axis
« Last Edit: May 07, 2014, 10:40:01 AM by Iaus » Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #6 on: May 07, 2014, 11:12:36 AM »

These SHOULD be correct.

KFZW axis:

1430C RPM
12E1E Load

KFZWOP axis:

12B58 Load
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #7 on: May 07, 2014, 11:49:19 AM »

These SHOULD be correct.

KFZW axis:

1430C RPM
12E1E Load

KFZWOP axis:

12B58 Load

Thanks Smiley  Do you have any opinion on whats holding my Load back?

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.038 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)