curamrdan
Full Member
Karma: +4/-1
Offline
Posts: 128
|
|
« Reply #3 on: June 15, 2014, 09:35:22 AM »
|
|
|
Oops, noob fail. MPPS read 1024k and im just see 032 name and scrolled to the end of file to brief check if read was succesfull.
So, i remake file to 512k and go to nefmoto to flash. I must choosed memory layout 29f400 to have write button active when new file loaded. Get warning message, that memory layout is proprably wrong, but i continued otherwise. Flashed ok (but seem to start writting from 80000h memory adress, i dont know these details if its right).
But not much changed. eg still have connection problems in VCDS, connect immediately ok, but after few sec disconnet and after 10-20sec recieving message of too many com problems. Before it work ok . Ecu info in nefmoto show some ugly marking after bin version, i think its normal? So i probably something screwed?
EDIT: VCDS still do not work, but VCDS lite with blue cable, and another universal diagnostic tool work ok, so assuming as everything is ok. Thread can be deleted.
|
|
« Last Edit: June 16, 2014, 11:56:29 AM by curamrdan »
|
Logged
|
|