NefMoto > Vehicles > Project Cars > Yet Another Single Turbo S4
Pages: [1]
« previous next »
Author Topic: Yet Another Single Turbo S4  (Read 14688 times)
Brodyaga
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: December 24, 2012, 10:10:13 PM »
I'm kinda new to nefmoto and this is my first post. figured this is a good place to start.. so I have an S4 and the drivers side turbo blew so I decided to go single instead of buying K04's again. Decided to do everything myself as I didn't want to shell out the money for the 034 kit(awesome kit btw) and I didn't want to wait forever cause it would take them a while till they'd make it with all that demand..











Logged
fastestaudiwagon
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 3
« Reply #1 on: December 30, 2012, 11:21:30 AM »
I have a single that I built myself. It took me almost a year to complete. It is not a easy task. I personally don't think their kit is awesome, or anything to brag about. For a shop car, I think It could have been done better. Good luck with yours.
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152
« Reply #2 on: December 30, 2012, 02:09:13 PM »
What did you use for the orange coating on there?
Logged
Brodyaga
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #3 on: December 30, 2012, 07:46:49 PM »
Quote from: fastestaudiwagon on December 30, 2012, 11:21:30 AM
I have a single that I built myself. It took me almost a year to complete. It is not a easy task. I personally don't think their kit is awesome, or anything to brag about. For a shop car, I think It could have been done better. Good luck with yours.

it's gonna be a mass produced kit which is amazing that they're doing that for the B5 platform! but thanks fastest..
Logged
Brodyaga
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #4 on: December 30, 2012, 08:05:08 PM »
Quote from: zillarob on December 30, 2012, 02:09:13 PM
What did you use for the orange coating on there?

It's ceramic coating. It should help keep underhood temperatures down..
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152
« Reply #5 on: December 31, 2012, 01:09:42 AM »
lol, I figured that. Did you send it out or is it something like vht flame proof?
Logged
Brodyaga
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #6 on: December 31, 2012, 01:59:29 AM »
Quote from: zillarob on December 31, 2012, 01:09:42 AM
lol, I figured that. Did you send it out or is it something like vht flame proof?

true. true. lol
naw it's vht flameproof. used it on my VR6 turbo manifold and liked it a lot.
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152
« Reply #7 on: December 31, 2012, 02:23:13 AM »
Sweet man, thanks!
I am getting ready to do some work on my car and was considering using the vht on ex mani, hotside, and dp's.
Reviews look pretty hit or miss but hoping just a prep and cure prob for the people that failed.
Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #8 on: February 03, 2013, 09:06:45 PM »
The VHT is great if you find a good prep method for yourself.  Mainly follow the directions, a coarse scoth-brite finish seems to work the best for me with holding the ceramic and color, adjust for your conditions and cure off the car.  I bake stuff for a few hours and have had no issues.  On pieces i rushed there is a huge difference.
Logged
cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152
« Reply #9 on: February 08, 2013, 07:46:35 PM »
Im thinking scuff and clean, 2 light coats of white, and two light coats of orange.
Let dry a little and hit with heat gun after each coat for a little bonus and throw it in the oven when done.
Never played with this stuff though, should be interesting.
Logged
R19Oi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #10 on: December 11, 2014, 03:49:13 PM »





 
 
 
Ford Mustang 2019 Blue 2.3L vin: 1FATP8UH3K5159596
 
 
Lot sold for   20900
 
Auction:    I buy fast
 
Lot number: 28658375
 
Date of sale: 12.05.2019
 
Year: 2019
 
VIN: 1FATP8UH3K5159596
 
Condition: Run and Drive
 
Engine: 2.3L I4 N
 
Mileage: 827 miles (Actual)
 
Seller: Avis Budget Group
 
Documents: CLEAR (Florida)
 
Location: Orlando (FL)
 
Estimated Retail Value:
 
Transmission: Automatic
 
Body color: Blue
 
Drive: Rear Wheel Drive
 
Fuel: Gasoline
 
Keys: Present
 
Notes: Not specified
 
 
 
 
 
Ford Mustang Shelby GT350 1
The downside of wide front tires is a phenomenon known as “tramlining.” It’s the tendency of the car to follow grooves in the road, sometimes pulling the vehicle in a direction you don’t want to go. On a drive around Detroit, the GT350 was easily thrown off course by bumps and undulations in the road.
CNBC | Mack Hogan
Ford Shelby Mustang G350
Until the GT500 lands later this year, it’s the brawniest Mustang you can buy
 
 
1FATP8UH3K5159596
 
 
1FATP8UH3K5159596 Ford Mustang 2019 Blue 2.3L
1FATP8UH3K5159596 Ford Mustang 2019 Blue 2.3L
1FATP8UH3K5159596 Ford Mustang 2019 Blue 2.3L
1FATP8UH3K5159596 Ford Mustang 2019 Blue 2.3L
1FATP8UH3K5159596 Ford Mustang 2019 Blue 2.3L
« Last Edit: May 24, 2019, 06:27:47 PM by R19Oi » Logged
1fatp8uh3k5159596
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 05:41:43 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)