Part throttle

Pages: [1]

« previous next »

Author

Topic: Part throttle (Read 4419 times)

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Part throttle « on: October 04, 2014, 02:46:35 AM »

Hi,

I am using old Tony's satge 3 file with some changes to my setup.

I am expering some "jerking" under part throttle until 2500rpm's. Full throttle seems pretty much spot on.

What variables should I log to find what's going on with it?

OEM K04 turbos
Siemens Deka 630cc
xs downpipes
Stock maf


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Part throttle « Reply #1 on: October 04, 2014, 05:42:04 AM »

Quote from: armageddon on October 04, 2014, 02:46:35 AM

KFMIOP/KFMIRL are an issue in that file. That is where your problem lies.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: Part throttle « Reply #2 on: October 04, 2014, 10:52:12 AM »

when looking at it, KFMIOP is stock

Will put stock values on firsts columns of KFMIRL and see if that helps.

I had also tried berttos version that as KFMIOP axle rescaled and inverse of KFMIRL, part/full throttle was fine but was getting 17743 engine torque monitor2

thanks


	Logged

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: Part throttle « Reply #3 on: October 09, 2014, 03:38:20 AM »

KFMIRL with stock values on 50 and lower columns, cars runs great

thanks ddillenger


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 03:34:15 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search