Pages: [1]
Author Topic: LC1 wideband install B5 S4  (Read 3437 times)
Ptyrell
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« on: October 14, 2014, 08:02:22 AM »

Hi guys,

I want to install a LC1 wideband in the secondary o2 position in my SSAC exhaust. My car does not have secondary o2s installed from factory, and I was planing on connecting the output wire to pin 68 of the ECU to log. I dont want to really run a gauge into the car, so my question is what is the best switching 12V line and GND point to use? Is there something near the ECU that would suit?

Thanks
Logged
majorahole
Sr. Member
****

Karma: +16/-4
Offline Offline

Posts: 302


« Reply #1 on: October 14, 2014, 10:51:08 AM »

cant you do like an OEM wide-band retrofit? i thought i've read about this before??
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)