Hi, I just got this 03 allroad and before I get going on tuning I'd like to give the car a once-over to make sure everything is in good working order.
Everything looks pretty clean mechanically, I've checked the regular trouble spots and haven't found anything. I should do a boost leak check and upgrade the recirc valves, this is on the to-do list...
I do have a few driver information center messages I'm not sure on, and I need to flush the heater core to see if it'll blow warm air (lukewarm right now) - the temps stay good so I think(?) the waterpump and thermostat are good, going to try a flush first.
So on the DIC, it's showing a red oil warning and a red coolant warning. I've confirmed both fluids are topped off, so I think it's bad sensor or something - is there a good way to check these? Also at the top it cycles through a lot of items then says OK, I'm not clear on if that means all these were checked and OK, or if the items need checked and everything ELSE is OK. I could use some guidance here please.
(DIC video uploaded at:
http://youtu.be/knh5AiHGseY )
I also logged a run on ME7logger and would like advice on if this looks normal for an 03 allroad at altitude (Denver colorado), or if there's anything mechanical I should look at before I start telling the ECU to give me more GO
(ME7logger .csv file uploaded below)
