NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > AUM & AUQ ECU data.... Help....
Pages: [1]
« previous next »
Author Topic: AUM & AUQ ECU data.... Help....  (Read 7444 times)
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« on: October 18, 2014, 08:03:55 AM »
Hi, I have been editing my AUM software for a little while now and getting to grips. But now I am after more power and as the AUM and AUQ engines are the same other than different turbo wastegate actuators I thought why not as it is a 'factory' map...

So my question is will a AUQ 06A906032HN 0002 ECU data be ok to put on my AUM 06A906032DR ME7.5 0003 ECU?

Also when flashing this I don't write eeprom data do I?
Logged
fknbrkn
Hero Member
*****

Karma: +185/-21
Offline Offline

Posts: 1446


mk4 1.8T AUM
« Reply #1 on: October 18, 2014, 03:15:23 PM »
aum and auq engines are the same (wg actuators too)
main difference in software are ldrxn & ldrxnzk. so... its weird idea
Logged
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #2 on: October 26, 2014, 02:12:04 PM »
Quote from: fukenbroken on October 18, 2014, 03:15:23 PM
aum and auq engines are the same (wg actuators too)
main difference in software are ldrxn & ldrxnzk. so... its weird idea

ay, Thanks for the replay!!! has anyone got a good XDF and BIN file for a AUQ ECU? as I cant seem to get the check sums to be ok it says unfixable errors.

This is what I get every time... Sad maybe a incorrect XDF?
« Last Edit: October 26, 2014, 02:25:22 PM by scoot1043 » Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619
« Reply #3 on: October 26, 2014, 04:10:00 PM »
There's a good 032hn xdf around somewhere, take a look in the definitions forum.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #4 on: October 31, 2014, 11:47:20 PM »
Can you post the ori bin so i can add support for it in ME7Sum? Thanks!

Also make sure to download the latest version of ME7Sum.
« Last Edit: October 31, 2014, 11:51:07 PM by nyet » Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #5 on: October 31, 2014, 11:56:14 PM »
Is this the one?

Code:
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'bins/06A906032HN.bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4019.02//24C/Dst02o/220202//'
 Part Number : '06A906032HN '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0002'
 HW Number   : '0261207440'
 SW Number   : '1037363908'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x00F6B5 CalcAdd=0x00F6B5  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0xA3B1F1 CalcAdd=0xA3B1F1  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01bef0 Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...OK
 Searching for RSA offset #1...OK
         Signature: @8f5e4-8f664
           Modulus: @168d4-16954
          Exponent: @16954 = 3
 Searching for MD5 ranges...OK
 MD5 Block Offset Table @168b0 [32 bytes]:
 1) 0x00010002-0x00013FFE
 2) 0x00014252-0x00017F4E
 3) 0x00018192-0x0001FBDC
 4) 0x00026A00-0x0002FFFC
 EncrMD5: 02 7e 33 7a d2 89 80 58 d5 f7 00 df 42 75 ac 7a
 CalcMD5: 02 7e 33 7a d2 89 80 58 d5 f7 00 df 42 75 ac 7a
  OK

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...missing
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...missing
 Searching for main data checksum offsets...OK
 Main Checksums:
 1) 0x010002-0x013FFE CalcCSM: 00133BCE
 2) 0x014252-0x017F4E CalcCSM: 00274FD0
 3) 0x018192-0x01FBDC CalcCSM: 0044E763
 4) 0x026A00-0x02FFFC CalcCSM: 00C15BB8
 @8fe2a CSM: 00C15BB8 CalcCSM: 00C15BB8  Main data checksum OK

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1fb74 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D184BF
    0x00FC00-0x01FFFF CalcChk: 219E5BCF CalcCRC: 4C82430F SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 323E0957 CalcChk: 323E0957 OK (i)

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 70 checksums in bins/06A906032HN.bin

*** DONE! 0 error(s) in bins/06A906032HN.bin! ***
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #6 on: November 06, 2014, 02:40:01 PM »
Quote from: nyet on October 31, 2014, 11:47:20 PM
Can you post the ori bin so i can add support for it in ME7Sum? Thanks!

Also make sure to download the latest version of ME7Sum.

Thanks all for help, I have got the bin and XDF off here in different sections of the forum...

The files are below...
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #7 on: November 06, 2014, 07:51:54 PM »
Already have this file.

Latest ME7Sum should support it fine.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 14, 2024, 04:22:35 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.033 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)