Pages: [1]
Author Topic: Bricked my ECU trying to read ECU flash file  (Read 3843 times)
4literbeater
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: December 16, 2014, 01:02:14 PM »

Extremely new to this.  I was told ME7logger was a far better means of troubleshooting issues.  So I found a guide on Audizine.  In my search for a .bin for the car, I found you can read your own.  After trying to read the file, the car wouldn't start.  Now I am attempting to find an ECU file for my car, so I can flash it in boot mode. (from what I have gathered that is the only way to solve this problem, short of replacing the ECU.) 

So the leads me to this, can anyone help me find the .bin for a 2003 VW Passat 1.8t AWM automatic?  ECU number is 4B0906018DA 0261207 931 1039S01226.

Any help would be appreciated.  I hope that I haven'e FUBARed my ECU, and I can recover the stock tune.
Logged
4literbeater
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: December 16, 2014, 01:27:13 PM »

Found the .bin with a little more extensive searching.
Logged
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #2 on: December 16, 2014, 08:38:06 PM »

Have you tried to read a tuned file ? it can be the cause of bricked ecu I think.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)