Pages: [1]
Author Topic: finding maps problem!!!  (Read 6372 times)
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« on: December 26, 2014, 08:50:09 PM »

How does every find maps so easy!? I compare maps in winlos and can't seem to match anything up. I will post bin i'm trying to define and the second is the bin i'm comparing to. Help is much needed thank you in advance
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: December 26, 2014, 09:02:56 PM »

How does every find maps so easy!? I compare maps in winlos and can't seem to match anything up. I will post bin i'm trying to define and the second is the bin i'm comparing to. Help is much needed thank you in advance

What are you looking for?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #2 on: December 26, 2014, 09:28:22 PM »

every map, ldrxn timing and fueling plus delete mil codes but i don't want someone to tell me where they are at i want to learn how to find them. I usually do the easy route of using a defined map. But there is no defined map that transfer to this one so it's time to learn the patterns. I watched the video of how to find maps but still no go.
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #3 on: December 27, 2014, 01:07:19 PM »

Alright I'm catching on. Found timing but ldrxn is a different story. Can someone help me out with ldrxn?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #4 on: December 27, 2014, 09:45:07 PM »

0010 0fa0.
if you cant find it from that, just give up.
Logged
ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #5 on: December 30, 2014, 03:48:32 AM »

after searching I found it finally, but your posting through me for a loop. actual location 26E7A ldrxn
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #6 on: December 30, 2014, 12:42:03 PM »

I think you can better start with a defined 1024kb file in stead of this 512kb AA bin.
Also, if this is my definition, be carefull about MLHFM. It starts 3 bits too late if I recall correct. That is because the 018P definition I used to define this one also had MLHFM wrong.  Wink
Logged

ktm733
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 660



« Reply #7 on: December 30, 2014, 04:07:08 PM »

Actually ended up using another file, for some reason I couldn't match for some reason? I think you nailed it with the file being 512kb instead of 1024kb. Would that cause it for me to not find similar ldrdxn? I matched timing with the 512kb file but that was it?
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #8 on: January 01, 2015, 12:27:16 PM »

Its not exactly similar, but when just searching for parts of byte sequence I found it 2nd try somewhere around 1347C (start first axis).
Logged

majorahole
Sr. Member
****

Karma: +16/-4
Offline Offline

Posts: 302


« Reply #9 on: January 12, 2015, 01:10:05 PM »

if i cant match a full map, or axis values i try both 8 & 16 bit then start breaking it down to maybe half of the axis or a low area of load maps, where its likely to be the same as a different calibration.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)