NefMoto > Technical > Flashing and Chipping > MED9.1 Flash w/ MPPS
Pages: [1]
« previous next »
Author Topic: MED9.1 Flash w/ MPPS  (Read 9067 times)
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« on: March 05, 2015, 12:39:11 PM »
I'd like to flash over an unknown tune (going back to stock) via OBD using clone MPPS V12/13. I will have BDM capability in the near future, but don't at the moment. Wondering if....

1.) This is possible
2.) Will I have issues with immo because of the tune.

I suppose the immo issues will be the same when I get the BDM stuff up and running, so if you can answer that question, it would be appreciated. Thanks!
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #1 on: March 05, 2015, 12:43:27 PM »
You can write the stock file with MPPS, and you will have immo issues unless you copy over the immo blocks from the tuned file that is currently on your ECU.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #2 on: March 05, 2015, 12:53:29 PM »
You can't write B7's with it. If you have a mk5, you're fine.

As for the immobilizer, MPPS does not right the bootrom, so you can flash a mismatched immo file without affecting anything. You're good.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #3 on: March 05, 2015, 12:58:51 PM »
Thanks for the quick replies, guys. I'm going to try it, and report back!
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #4 on: March 05, 2015, 01:04:23 PM »
Car has 0040 revision, and all I can find is 0030 revision. Safe?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #5 on: March 05, 2015, 01:11:16 PM »
I just tested a B7 MED9.1 and Daz is of course correct. No write with MPPS. I was able to read/write a B6 Passat MED9.1 ECU.

The read is 100% identical as a BDM read. Havent changed the immo locations at 6C00 to 6FF0 and wrote back to see if it applies the changes on the Passat ECU.
However Im sure Daz is correct on that again.

Daz, will turning the immo off on B7 ECU's allow write via MPPS?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #6 on: March 05, 2015, 01:30:40 PM »
Quote from: f1torrents on March 05, 2015, 01:11:16 PM
I just tested a B7 MED9.1 and Daz is of course correct. No write with MPPS. I was able to read/write a B6 Passat MED9.1 ECU.

The read is 100% identical as a BDM read. Havent changed the immo locations at 6C00 to 6FF0 and wrote back to see if it applies the changes on the Passat ECU.
However Im sure Daz is correct on that again.

Daz, will turning the immo off on B7 ECU's allow write via MPPS?

The real ones work. The clones, not so much.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #7 on: March 05, 2015, 01:40:48 PM »
I have real
VCDS
VagTacho
VagDashCan

Mpps not so much...  Wink
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #8 on: March 05, 2015, 01:49:28 PM »
Just wanted to update, process was a success. Even changed software revision versions. Thanks for the assistance.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 826
« Reply #9 on: March 05, 2015, 05:44:58 PM »
DD great info but I have two doubts:

Quote from: ddillenger on March 05, 2015, 12:53:29 PM
You can't write B7's with it. If you have a mk5, you're fine.

Do you have tested another interface that I have seen around there, CMD CAN Flasher V1251? supposedly it is specific for MED9xx and EDC16xx.

Quote from: ddillenger on March 05, 2015, 12:53:29 PM
As for the immobilizer, MPPS does not right the bootrom, so you can flash a mismatched immo file without affecting anything.

Is this OK if you flash data only and no full read?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 10:48:34 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)