Pages: [1]
Author Topic: Install NEW ECU. Please help Clone ECU/Read out Pin  (Read 3158 times)
R32VAG
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« on: May 15, 2015, 09:13:50 AM »

Hello,

i have a MK5 Golf R32 with ECU 022906032CE. This ecu works not well anymore. So i buy a new ecu. Exact the same number.
Now i want to install it to my car. How can i connect this new ecu with the instrument so i can get start the car? Can i write the old VIN to the new ecu? I have VCDS, VAG K+Can Commander 1.4 and 5.5.

How can i do this?
Is it possible to put the eeprom chip from the old ecu to the new one and it works?
Thanks a lot.
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: May 15, 2015, 02:47:30 PM »

Yes, swapping the eeprom is sufficient.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)