Can I get a checksum confirmation, please?

Pages: [1]

« previous next »

Author

Topic: Can I get a checksum confirmation, please? (Read 9059 times)

A6_C5_Allroad

Full Member

Karma: +0/-0
Offline

Offline

Posts: 116

	Can I get a checksum confirmation, please? « on: April 28, 2015, 11:22:59 AM »

Can some please checksum this to confirm my checksum... Huh

Ran this through my checksum plugin and came through clean, but i still think there's something wrong....... as I'm getting the ""No Run after first run..no CEL...etc..."" and it is driving me crazy. cannot think of anything else than a bad checksum n the ECU 95040 eeprom bin. Thanks!!


	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2802

	Re: Can I get a checksum confirmation, please? « Reply #1 on: April 28, 2015, 12:05:37 PM »

Upload the orig to compare


	Logged

Giving your mom a tuneup

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Can I get a checksum confirmation, please? « Reply #2 on: April 28, 2015, 12:25:32 PM »

All the checksums are correct in that file.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

A6_C5_Allroad

Full Member

Karma: +0/-0
Offline

Offline

Posts: 116

	Re: Can I get a checksum confirmation, please? « Reply #3 on: April 28, 2015, 03:04:26 PM »

Quote from: ddillenger on April 28, 2015, 12:25:32 PM

All the checksums are correct in that file.

Thank you, DDillenger..!! I'm wondering if the Flash BIN, although original 8D0907551"M" (M-Box as I bought it from forum member ) could be bad?? Looks like I'll have to remove the flash chip, reprogram and solder back on. Sucks, but has to be done.


« Last Edit: April 28, 2015, 03:19:10 PM by A6_C5_Allroad »	Logged

A6_C5_Allroad

Full Member

Karma: +0/-0
Offline

Offline

Posts: 116

	Re: Can I get a checksum confirmation, please? « Reply #4 on: April 28, 2015, 03:18:10 PM »

Quote from: Marty on April 28, 2015, 12:05:37 PM

Upload the orig to compare

Marty, ATTACHED is the "original BIN" that is on the Flash Chip ( am29f800BB-70SE ). So are you thinking that it may be the flash BIN and not the 95040 BIN..??


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Can I get a checksum confirmation, please? « Reply #5 on: April 28, 2015, 04:50:12 PM »

If the car runs, then shuts off, I'd check the soldering


	Logged

A6_C5_Allroad

Full Member

Karma: +0/-0
Offline

Offline

Posts: 116

	Re: Can I get a checksum confirmation, please? « Reply #6 on: April 28, 2015, 06:58:35 PM »

Quote from: ddillenger on April 28, 2015, 04:50:12 PM

If the car runs, then shuts off, I'd check the soldering

DDillenger, I'll do that. But, wouldn't the car simply not start if there were a solder issue?? Also, what about how I need to disconnect the ECU, I suppose to allow caps to discharge, before it will start again. ( If I leave the ECU in the car, after the engine dies, i cannot restart the car.)

I'll do what you said, because you are always right and your advice has always panned out for me.

Thank you for your attention to my problem/s


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 02:28:06 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search