Pages: [1]
Author Topic: Error 18058 when flashing M File in D Box  (Read 4046 times)
Chris1982
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 59


« on: April 10, 2015, 12:04:53 PM »

Hey Guys!

I tried flashing the M Box File in my D Box!

I Read the fault Codes and had Error 18058 No Communication to dash Board.

So I can't Start my car because of the Immo!

What should I do now? Any ideas?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: April 10, 2015, 12:45:11 PM »

M-box has no immo. It shouldn't care.

If you have missing message error:

http://s4wiki.com/wiki/Tuning#Missing_Message_from_Instrument_Cluster
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Chris1982
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 59


« Reply #2 on: April 10, 2015, 01:10:58 PM »

M-Box has no Immo? Ok, so i should turn it off in the dash board with VAG Dashcan, or not? Because engine is starting, turns oft after a second and the key icon is flashing...
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: April 10, 2015, 01:22:06 PM »

You'll have to flash your cluster with a non-immo eeprom probably

You may also have to get an mbox eeprom for your ecu

Either way, make backups of both!
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: April 10, 2015, 03:08:52 PM »

Hey Guys!

I tried flashing the M Box File in my D Box!

I Read the fault Codes and had Error 18058 No Communication to dash Board.

So I can't Start my car because of the Immo!

What should I do now? Any ideas?

If you flashed an M-box, the car would start.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)