Pages: [1]
Author Topic: Bulb Warning System  (Read 3234 times)
Bi-turbo
Full Member
***

Karma: +1/-7
Offline Offline

Posts: 164


« on: April 12, 2015, 12:22:22 PM »

I have a bulb warning symbol on the LCD DID, I have tried the mod to the 387 bulb warning controller where you solder a wire and two resistors to make the System believe it's fault free.

This happens because of LED drawing less current so the system thinks that a bulb has failed.

The resistors mod hasn't worked for me.

Is there a way to disable the system altogether by grounding out a wire from the cluster to the control unit?
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #1 on: May 04, 2015, 06:01:17 PM »

Which car are you talking about?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)