NefMoto > Technical > Tuning > What ECU can i use to replace mine?
Pages: [1]
« previous next »
Author Topic: What ECU can i use to replace mine?  (Read 7610 times)
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« on: January 10, 2012, 03:17:28 AM »
Well in case my ECu is faulty or damaged etc what ECU can i use to replace it (except of the same one Tongue)?

My MY2005 car runs with the management of an Bosch ME7.5 0261208521 or vag part number 06A906032RP ECU. 

Thanks in advance!
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #1 on: January 11, 2012, 09:17:17 AM »
No one can help?

As far as i know 032QN and 032TL will work.

Do you know what other codes will match my 032RP ecu?
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
createddeleted
Full Member
***

Karma: +7/-2
Offline Offline

Posts: 90
« Reply #2 on: January 11, 2012, 09:33:53 AM »
Quote from: professor on January 10, 2012, 03:17:28 AM
Well in case my ECu is faulty or damaged etc what ECU can i use to replace it (except of the same one Tongue)?

My MY2005 car runs with the management of an Bosch ME7.5 0261208521 or vag part number 06A906032RP ECU. 

Thanks in advance!


1.8t AWP?

If so you can use any wideband ecu with the correct immo defeated.

Such as mine was an RN and I've been using PL and HN stuff.
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #3 on: January 11, 2012, 09:50:12 AM »
No its an 1.8T 20V BBU motor.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #4 on: January 15, 2012, 11:13:22 AM »
Really i am looking for an answer to my problem.

My car is a mk4 ibiza 1.8T 20V with BBU engine MY2005.
The 06A906032RP ecu ME7.5 doesnt work.
Is drived by wire, wideband, FWD and probably having immo3.

I do have the flash file which was working without problems.
I do not have the eeprom data.

What ECU part number can i use to replace it and how this can be done?

Any help is more than welcome.
Thanks for reading this.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #5 on: February 27, 2012, 03:16:36 AM »
According to this, only 9N could be used for switched over.


Well i ll attach it over here cause i think is useful.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
marcello7x
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 126
« Reply #6 on: March 01, 2012, 01:04:45 PM »
I tend to make posts then answer my own question with more research. props for posting your findings to help others.
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #7 on: March 01, 2012, 01:09:16 PM »
Ty and i confirm that 032QN (9N) ECU does work ok replacing 032RP (9N), by trying it my self.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
.
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 29
« Reply #8 on: September 10, 2015, 12:44:40 PM »
Hello professor, can you post your 06A906032rp flash and eeprom?,i want try this combination in my bjx engine.thanks
Logged
slappynuts
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 49
« Reply #9 on: September 10, 2015, 08:07:45 PM »
More info needed, is the car a wideband? 512 or 1024k? VVT?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 03:41:49 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.033 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)