Pages: 1 [2]
Author Topic: ME7Logger - Stage 2 Me7.5 1.8T BAM - MAF stuck at 185g/s  (Read 3928 times)
prj
Hero Member
*****

Karma: +1021/-434
Offline Offline

Posts: 5872


« Reply #15 on: November 08, 2023, 05:32:17 AM »

MLMAX does absolutely nothing apart from affecting the load display in an OBD II (SAE) PID.
There is zero need to ever modify this.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
stack
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 10


« Reply #16 on: November 08, 2023, 06:52:54 AM »

Does this mean simply enter the maximum value of MLHFM in MLMAX and the limitation is removed on software side?

No this is only the limit of pre-calculation for Display. You can change it, if you want to have for some after market Loggers more than the output of 189g/s.

On some ME7 you have MLDHFMKO which really limits your Airmass, if you cross that point Lambda is not calculated anymore.

They have "normal" factors, 16bit lohi, for kg/h use 0.1 or for g/s 0.027778.
Logged
M.Mischler
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 36


« Reply #17 on: November 08, 2023, 08:28:29 AM »

MLMAX does absolutely nothing apart from affecting the load display in an OBD II (SAE) PID.
There is zero need to ever modify this.

No this is only the limit of pre-calculation for Display. You can change it, if you want to have for some after market Loggers more than the output of 189g/s.

OK, thank you both for your information.
Logged
mRj
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 35


« Reply #18 on: November 09, 2023, 01:09:47 PM »

I put the TT back on a stock map and still get about 185g/s but its certainly slower...will change some parts at the weekend and see what is going on.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)