Pages: 1 [2]
Author Topic: 06A 906 032HJ Checksums  (Read 17009 times)
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #15 on: December 16, 2015, 12:30:39 AM »

now need to research more about what else I need to change to disable SAI then!

SLS turns it off. missing hardware = ESKONF.
Logged
nick8428
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #16 on: December 16, 2015, 05:10:38 AM »

SLS turns it off. missing hardware = ESKONF.

Thanks mate, i've returned SLS back to stock value and adjusted the 2 values in ESKONF, hopefully that will do the trick.
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #17 on: December 16, 2015, 05:47:22 AM »

SLS turns it off.

I've returned SLS back to stock value.

So, it turns it off and you turned it back on?
Logged
nick8428
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #18 on: December 16, 2015, 02:11:49 PM »

SLS is disabled properly. thats really all you need if you keep the hardware on the car.

As said previously, I don't have the pump or n112 any more so.......
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #19 on: December 16, 2015, 02:15:06 PM »

SLS TURNS OFF THE DIAG CHECK FOR SAI. do you not understand? why would you turn it back on?
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #20 on: December 16, 2015, 11:49:44 PM »

If you turn off diagnostics,adjust the SLS.  If you remove the hardware, use ESKONF. 
Logged
nick8428
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #21 on: December 19, 2015, 09:14:33 AM »

If you turn off diagnostics,adjust the SLS.  If you remove the hardware, use ESKONF. 

Thank you...... That is what I have done.
Logged
nick8428
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #22 on: December 19, 2015, 09:24:23 AM »

SLS is disabled properly. thats really all you need if you keep the hardware on the car.

THIS IS WHY I THEN WENT ON TO ADJUST ESKONF!!!!!!! As I don't have the hardware anymore..... So forgive me if I don't understand as you are confusing the hell out of me......
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)