NefMoto > Technical > Flashing and Chipping > ECU reading - "Flash checksum does not match, trying to read flash again"
Pages: [1]
« previous next »
Author Topic: ECU reading - "Flash checksum does not match, trying to read flash again"  (Read 3808 times)
andrade_br
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
Hi,
Reading a ME 7.5 (A3 180 APP engine, checksum disabled ecu, tuned file), the msg above always comes up after 50% of reading.
After 3 times, it says "flash checksum still does not match after 3 attempts, giving up and skiping".
Does it means that the content was disregarded when skipped or just not "validated" ? From 50% on, every block read goes through the 3 attempts.
Tried:
29F800/29F800BB/29F800/BT layouts - stills the same
All possible baud rates - stills the same

Should I let it go all the way til the end and I would be ok with that pulled out ".bin" ?
Tks
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #1 on: December 20, 2015, 10:29:51 PM »
Quote from: andrade_br on December 20, 2015, 07:00:56 PM
Hi,
Reading a ME 7.5 (A3 180 APP engine, checksum disabled ecu, tuned file), the msg above always comes up after 50% of reading.
After 3 times, it says "flash checksum still does not match after 3 attempts, giving up and skiping".
Does it means that the content was disregarded when skipped or just not "validated" ? From 50% on, every block read goes through the 3 attempts.
Tried:
29F800/29F800BB/29F800/BT layouts - stills the same
All possible baud rates - stills the same

Should I let it go all the way til the end and I would be ok with that pulled out ".bin" ?
Tks




1. You didn't post your ecu number.
2. You are using an old beta of nefmoto, not the current release.

Fix that.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
andrade_br
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #2 on: December 21, 2015, 01:53:16 AM »
ECU 06A906023S

I was in fact using a older nefmoto version. I didn't realize that the link at Wiki was not calling for the latest release.

Downloaded 1.9.3.2. and will try again.

Tks
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 387
« Reply #3 on: December 21, 2015, 10:13:07 AM »
Your ECU use an 29F400BB memory
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 05:59:17 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)