RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID

Pages: 1 [2]

« previous next »

Author

Topic: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID (Read 23430 times)

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #15 on: November 27, 2014, 12:12:13 AM »

Quote from: nyet on November 26, 2014, 07:23:57 PM

While this correlates well with my fully defined G-box, the pssol_w axis values look odd... they are 1.1719-9.3750..

that can't be pssol....

It's definitely pssol_w. The table isn't used however, similar to the lamfa axis.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #16 on: November 27, 2014, 01:01:36 AM »

Thanks!


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #17 on: November 27, 2014, 08:26:56 AM »

I should clarify, the map is used, but it does nothing as it is all 1's.

For the sake or completeness, there is also KFWPLGTA which gives plgta and is also filled with 1's.

KFWPLGTA 0x19749 * 0.0078125

Rows:
nmot_w SNM08LDUW 0x12AB6 * 0.25

Cols:
tans STA08LDUB 0x1010C * 0.75 - 48

The output from KFVPLGU is multiplied by plgta and the result is then multiplied by pu_w giving plgrus_w.

Therefore, plgrus_w is always equal to pu_w.


	Logged

SB_GLI

Hero Member

Karma: +116/-10
Offline

Offline

Posts: 1022

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #18 on: December 01, 2015, 05:39:54 PM »

I'm late to the party per usual, but this thread is a big help. I never even realized until recently that the allroad boost was controlled this way. Thanks to everyone!


	Logged

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #19 on: December 03, 2015, 01:14:23 PM »

I have problem defining rpm axis for KFVPLGU.
Would any of you take a look, what is the RPM adress, please??


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #20 on: December 03, 2015, 01:18:44 PM »

0x12D72

16 bit, .25*x


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #21 on: December 03, 2015, 01:29:38 PM »

Perfect, thanx DD


	Logged

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #22 on: December 26, 2015, 07:03:05 PM »

I had found KFVPLGU on F-box @0x15946 but can not find on k-box...


	Logged

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #23 on: December 27, 2015, 01:26:23 AM »

Quote from: armageddon on December 26, 2015, 07:03:05 PM

I had found KFVPLGU on F-box @0x15946 but can not find on k-box...

1E2F0 in K box 8x16


	Logged

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: RS4/551R Base boost pressure maps plgrus_w and how to properly calibrate the PID « Reply #24 on: December 27, 2015, 05:00:59 AM »

Quote from: Mocke on December 27, 2015, 01:26:23 AM

1E2F0 in K box 8x16

thanks again Grin


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 10:38:52 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search