Haldex Controllers Thinking.....

Pages: 1 ... 7 8 [9] 10 11 ... 29

« previous next »

Author

Topic: Haldex Controllers Thinking..... (Read 256346 times)

sn00k

Sr. Member

Karma: +59/-2
Offline

Offline

Posts: 277

	Re: Haldex Controllers Thinking..... « Reply #120 on: July 15, 2014, 05:06:59 PM »

sign me up!

i have a spare Gen 1 unit on the shelf from my audi A3..

so, we need to read one of these.. to later dissassemble the code and find the "key", so we can "login" and flash it over OBD.. and the issue at hand seem to be the FIRST readout iirc?
the rest shouldnt be much of a problem with some assistance and ASM knowledge.

i also have access to a Blue Gen 1 controller in my car, and my friend has a modified OEM unit with special code, made for a VW Bora v6 4-motion previously owned by the head of Haldex here in sweden.. (im thinking IF the Blue code dont work to flash in the stock units.. this other software probably will.. same same performance wise from what we can tell over here on the ice-tracks..)


« Last Edit: July 15, 2014, 05:13:40 PM by sn00k »	Logged

Tiero

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Haldex Controllers Thinking..... « Reply #121 on: July 16, 2014, 01:18:12 PM »

Someone on vortex did it i'm not sure if it was through the CAN bus out of car or he was able to get the rom: http://forums.vwvortex.com/showthread.php?3959804-Haldex-flash/page5

Seems like the whole thing ended after he got the BIN file. A little odd but who knows what actually happened.

I'm trying to get my hands on one to see if I will be able to get a BIN through CAN with a dev board. If that's impossible I will take it to work and solder some wires to the board under a microscope so i can get at the rom.

How big is that board? It looks fairly large based on the components so i should be able to do it without any issues.

If anyone has a stock controller i'll buy it off you.


	Logged

Gonzo

Sr. Member

Karma: +20/-30
Offline

Offline

Posts: 483

	Re: Haldex Controllers Thinking..... « Reply #122 on: July 16, 2014, 03:05:51 PM »

Working on it Wink


	Logged

thesnowman

Newbie

Karma: +1/-0
Offline

Offline

Posts: 21

	Re: Haldex Controllers Thinking..... « Reply #123 on: July 16, 2014, 06:47:23 PM »

HPA are a few weeks away from the next batch of gen 1 interfaces, they are a inline piggy back system with a touch screen.

If i had a spare haldex id help.

Will keep following this


	Logged

ported2flow

Full Member

Karma: +2/-0
Offline

Offline

Posts: 76

	Re: Haldex Controllers Thinking..... « Reply #124 on: July 16, 2014, 07:14:21 PM »

i wonder if anyone ever tried to connect with minimon to the ecu???


	Logged

sn00k

Sr. Member

Karma: +59/-2
Offline

Offline

Posts: 277

	Re: Haldex Controllers Thinking..... « Reply #125 on: July 22, 2014, 11:34:56 AM »

a small update from Sweden..

Haldex have stopped selling the Blue Gen 1 controllers due to lack of hardware/controllers to upgrade..

BUT, they are now instead offering to update YOUR controller to the "new sport software" for ~60% of the price that a BLUE controller did cost a few weeks back when available.
(well, you dont have to buy the hardware now, which works out better for everyone)

Return time from sending in your controller untill you have it updated in hand, states about 1 week if sending within the country.

so obviously its 100% possible to flash the sport software onto ANY controller.. so basically.. one read = free Haldex controllers for anyone and everyone = more potential for further development like UM have done.

just thought id mention this


	Logged

ported2flow

Full Member

Karma: +2/-0
Offline

Offline

Posts: 76

	Re: Haldex Controllers Thinking..... « Reply #126 on: July 22, 2014, 12:06:07 PM »

sn00k this is great news!!!!


	Logged

thesnowman

Newbie

Karma: +1/-0
Offline

Offline

Posts: 21

	Re: Haldex Controllers Thinking..... « Reply #127 on: July 22, 2014, 02:23:53 PM »

Their new interface is only $599 usd on pre sale anyway, i have 2 on order


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Haldex Controllers Thinking..... « Reply #128 on: July 22, 2014, 03:47:41 PM »

Is this for first gen?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

thesnowman

Newbie

Karma: +1/-0
Offline

Offline

Posts: 21

	Re: Haldex Controllers Thinking..... « Reply #129 on: July 22, 2014, 04:02:47 PM »

Quote from: vwaudiguy on July 22, 2014, 03:47:41 PM

Is this for first gen?

Yep, first gen only

Quote

Included in the kit will be an LCD screen, cable/harness, and a connector that will "T" the link between the Haldex unit and the CAN-Bus (there is no Haldex module included; you will still need to acquire a new or used OE unit).

This unit will allow variable manipulation of the Haldex system, the ability for the driver to choose and switch engagement control on the fly.


	Logged

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: Haldex Controllers Thinking..... « Reply #130 on: July 23, 2014, 04:58:14 AM »

So it's going to spoof the wheel speed, handbrake signals etc?


	Logged

How to work out values from an A2L

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371

Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=

ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Haldex Controllers Thinking..... « Reply #131 on: July 23, 2014, 08:30:20 AM »

I was under the impression is was essentially an external map switching device..


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: Haldex Controllers Thinking..... « Reply #132 on: July 23, 2014, 10:09:49 AM »

Found the vw self study haledex docs, apologies if this is a repost:
http://www.volkspage.net/technik/ssp/ssp/SSP_333.pdf
http://www.vaglinks.com/Docs/VW/Misc/VW_Haldex_AWD_SelfStudyGuide.pdf
http://www.vaglinks.com/Docs/Audi/TT/Audi_TT_Haldex_SelfStudyGuide.pdf


« Last Edit: July 23, 2014, 10:14:17 AM by turboat »	Logged

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: Haldex Controllers Thinking..... « Reply #133 on: August 26, 2014, 04:18:06 PM »

Well I again tried boot mode on the Volvo haldex that I have spare.

The controller works and responds to can comms. I soldered 12v, ground, canh, canl and kline and it all appears to work. I verified the 256k eeprom is connected to the correct cpu pin. Tried grounding it for 2-10 secs and no joy with minimon. As soon as ground is released the haldex ecu instaboots into normal op mode and spews out kline traffic when I diagnose it over canbus.

Any ideas?


	Logged

How to work out values from an A2L

krazydbiker

Full Member

Karma: +4/-1
Offline

Offline

Posts: 202

	Re: Haldex Controllers Thinking..... « Reply #134 on: August 26, 2014, 07:52:19 PM »

do you know which version of the processor is in there?
also i saw this "The pulldown must
be strong enough to force the voltage at the P0L.4 pin during reset below the upper VIH limit of
0.2VCC + 0.9V. On the other hand, it must be weak enough to allow the P0L.4 output to drive a high
level after reset."

recommend's 8K resistor

http://alt.ife.tugraz.at/datashts/Siemens/ap160701.pdf

this may be an issue

"Note that the port pins P0L.2, P0L.3 and P0L.5 must be at high level, and stable during and at the
end of reset otherwise the BSL routine is not started. The state at the EA input pin has to be stable
during and at the end of reset, too, to avoid unexpected effects."


« Last Edit: August 26, 2014, 08:09:31 PM by krazydbiker »	Logged

Pages: 1 ... 7 8 [9] 10 11 ... 29

« previous next »

Jump to:

Navigation

Personal Tools

April 19, 2024, 04:11:58 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search