NefMoto > Technical > Reverse Engineering > Haldex Controllers Thinking.....
Pages: 1 ... 11 12 [13] 14 15 ... 29
« previous next »
Author Topic: Haldex Controllers Thinking.....  (Read 276206 times)
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184
« Reply #180 on: December 16, 2015, 03:15:50 PM »
you really should look at 29f200b instead of the 29f200a
« Last Edit: December 16, 2015, 03:18:04 PM by DT » Logged
Try ME7idatool http://nefariousmotorsports.com/forum/index.php?topic=21130.0
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54
« Reply #181 on: December 16, 2015, 03:18:58 PM »
so I do not know!!
Logged
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54
« Reply #182 on: December 16, 2015, 03:23:57 PM »
when we read the haldex with minimon we will know!
Logged
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184
« Reply #183 on: December 16, 2015, 03:37:10 PM »
Quote from: john9357 on December 16, 2015, 03:23:57 PM
when we read the haldex with minimon we will know!
For sure, I have a Haldex gen1 ecu now but fortunately it's a fully functioning unit and I'ld rather not damage it if I can avoid.
Logged
Try ME7idatool http://nefariousmotorsports.com/forum/index.php?topic=21130.0
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54
« Reply #184 on: December 16, 2015, 03:46:02 PM »
right now I developed the jfis ( personal color fis display) and I learn KWP2000 and 1281 via can (can TP1.6 and TP2.0 can ). Maybe it's possible to read the flash via can!
Logged
ccyberwing
Newbie
*

Karma: +7/-0
Offline Offline

Posts: 19
« Reply #185 on: December 17, 2015, 04:15:22 AM »
Nice Thread, you are very close to read this Controller.
If you want i can write a little guide how to read this controllers (in christmas holidays).

About flash sizes: there exist both variants, 29F100 and F200.

In the meantime a small christmas present as attachment. full readout,flash & eeprom.  Wink

best regards
Tom
« Last Edit: December 17, 2015, 04:25:48 AM by ccyberwing » Logged
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54
« Reply #186 on: December 17, 2015, 04:55:35 AM »
Wow amaizing!
Read via kline or can?
I manage to read the controler via kline with the kwp1281 eeprom read command after enter security mod with login 5207 (only this login work) but read flash and ram doesnt work.
Logged
ccyberwing
Newbie
*

Karma: +7/-0
Offline Offline

Posts: 19
« Reply #187 on: December 17, 2015, 04:59:36 AM »
via Kline.
5207 is the only login in Software, but unfortunately this login is only for engineering mode to alter the eeprom values.
Logged
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184
« Reply #188 on: December 17, 2015, 05:01:19 AM »
finally  Smiley
Big thank you for the file. I think there will be some IDA work for me this weekend.
Logged
Try ME7idatool http://nefariousmotorsports.com/forum/index.php?topic=21130.0
ccyberwing
Newbie
*

Karma: +7/-0
Offline Offline

Posts: 19
« Reply #189 on: December 17, 2015, 05:11:48 AM »
Quote from: DT on December 17, 2015, 05:01:19 AM
finally  Smiley
Big thank you for the file. I think there will be some IDA work for me this weekend.

No Problem Smiley , you'll have fun with IDA - this software is perfect and "mostly" simple to disassemble  Cheesy
Logged
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54
« Reply #190 on: December 17, 2015, 05:36:36 AM »
Thank you very much. I do not have time to disassemble for now , I must finish my jfis.
Logged
ccyberwing
Newbie
*

Karma: +7/-0
Offline Offline

Posts: 19
« Reply #191 on: December 17, 2015, 05:47:18 AM »
nice project! stm32?
Logged
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184
« Reply #192 on: December 17, 2015, 05:49:48 AM »
Quote from: ccyberwing on December 17, 2015, 04:59:36 AM
via Kline.
Did you also find out how to write flash with Kline?
Logged
Try ME7idatool http://nefariousmotorsports.com/forum/index.php?topic=21130.0
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184
« Reply #193 on: December 17, 2015, 05:51:27 AM »
Quote from: john9357 on December 17, 2015, 05:36:36 AM
Thank you very much. I do not have time to disassemble for now , I must finish my jfis.
Really nice John
Logged
Try ME7idatool http://nefariousmotorsports.com/forum/index.php?topic=21130.0
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54
« Reply #194 on: December 17, 2015, 05:53:22 AM »
No, atmel sam3x
Logged
Pages: 1 ... 11 12 [13] 14 15 ... 29
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 10:38:06 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)