First time reading my ecu, everything checked out until I ran it with me7check and got 1 error:



me7check v1.12 (c) mki, 06/2004-05/2012
Checking file stockaudi.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 05.12/05.32
-> EPK = 40/1/ME7.1/5/6005.01//22m/DstD1o/110700//
-> Contents of ECUID data table:
   - '0261207004'         (SSECUHN)
   - '1037354145'         (SSECUSN)
   - '8D0907551L  '       (VAG part number)
   - '0001'               (VAG sw number)
   - '2.7l V6/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

Overall checksum failure found
-> Found 1 error!!!   *******************************


Any help would be fantastic. Thank you.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

C:\Users\Kirsch's>me7sum stockaudi.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'stockaudi.bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.1/5/6005.01//22m/DstD1o/110700//'
 Part Number : '8D0907551L  '
 Engine ID   : '2.7l V6/5VT     '
 SW Version  : '0001'
 HW Number   : '0261207004'
 SW Number   : '1037354145'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x013225 CalcAdd=0x013225  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0xAC48D3 CalcAdd=0xAC48D3  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01b9b0 Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...missing
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 1) 0x010002-0x013FFE @7a866 CRC: 3B8670EB CalcCRC: 3B8670EB    CRC OK
 2) 0x014252-0x017F4E @7a86c CRC: 1EDBA882 CalcCRC: 1EDBA882    CRC OK
 3) 0x018192-0x01FBB0 @7a872 CRC: C8B26E0D CalcCRC: C8B26E0D    CRC OK

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1e75a [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 47AE74F4
    0x00FC00-0x01FFFF CalcChk: 28DFE26A CalcCRC: CC5B207C SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 90547AD3 CalcChk: 9CC2F998 ** NOT OK **

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...OK
 1) <14224>  0x024000-0x02658D Chk: 0B08F804 CalcChk: 0B08F804 OK
 2) <14234>  0x014000-0x014243 Chk: 00591FE7 CalcChk: 00591FE7 OK (i)
 3) <14244>  0xFFFFFFFF-0xFFFFFFFF  END
 Multipoint #1: [2 blocks x <16> = 32 bytes]
 Searching for multipoint block descriptor #2...OK
 1) <1fbb2>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbc2>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbd2>  0x000000-0x003FFF Chk: 0FF7275A CalcChk: 0FF7275A OK
 4) <1fbe2>  0x004000-0x007FFF Chk: 0F68CD6E CalcChk: 0F68CD6E OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 73 checksums in stockaudi.bin

*** WARNING! 1/1 uncorrected error(s) in stockaudi.bin! ***

haha well thank you. I have been fooling around with everything and have fixed the errors and am now running a stage 1 flash in my AR. Thank you for everything. coming from an n54 world, things are a little more involved on this side of the pond and I need to delve a little more. Thanks again.