Pages: [1]
Author Topic: MED 9.1 Bootmode Activation and Bench Flashing harness  (Read 3434 times)
JBL20
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: August 05, 2018, 10:00:41 AM »

Hello guys.

I want to flash a MED 9.1 ECU on my workbench.

Now I have 2 questions:

- How can I start the bootmode on MED 9.1 ECUS?

- Wich resistors do I need for Bootpin, Clamp 15 and Clamp 30 ?

I hope for your help  Smiley

Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #1 on: August 05, 2018, 06:50:11 PM »

Hello guys.

I want to flash a MED 9.1 ECU on my workbench.

Now I have 2 questions:

- How can I start the bootmode on MED 9.1 ECUS?

- Wich resistors do I need for Bootpin, Clamp 15 and Clamp 30 ?

I hope for your help  Smiley



There is no MED9 boot mode; it's BDM.
Logged
yxx499
Full Member
***

Karma: +4/-10
Offline Offline

Posts: 106


« Reply #2 on: August 05, 2018, 07:01:46 PM »

Solder BDM pads permanently to the ecu board is the fastest way i think.
Logged
prj
Hero Member
*****

Karma: +915/-428
Offline Offline

Posts: 5843


« Reply #3 on: August 05, 2018, 11:45:57 PM »

Solder BDM pads permanently to the ecu board is the fastest way i think.
You should never solder BDM pads ever.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 1.623 seconds with 17 queries. (Pretty URLs adds 0.00099999999999989s, 0q)