Pages: [1]
Author Topic: Stage 1 tune  (Read 4730 times)
Jonnyth3boy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« on: March 26, 2016, 08:07:48 AM »

OK, so I've got my 1.8t.bin file, I have my ols map file...now...what do I want to adjust for a stage one tune? Right now I'm figuring drivers wish, ignition advance and maybe torque limiter. Am I missing anything? Also, on a % basis I should be looking at about a 3-5% increase in values yes?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: March 26, 2016, 08:26:01 AM »

ctrl-a, shift+%, "5", enter. boom, stg1.
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556


« Reply #2 on: March 26, 2016, 09:49:14 AM »

Lol
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #3 on: March 26, 2016, 10:15:23 AM »

Tried reading yet?
Logged
Jonnyth3boy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #4 on: March 27, 2016, 08:09:12 AM »

ctrl-a, shift+%, "5", enter. boom, stg1.
If only it were that simple
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #5 on: March 27, 2016, 11:38:52 AM »

Have you read ANY of the tuning page wiki, the FR, or the stage 1 community tune thread?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Jonnyth3boy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #6 on: March 27, 2016, 03:22:38 PM »

Have you read ANY of the tuning page wiki, the FR, or the stage 1 community tune thread?
No, but thanks for steering me there. Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)