Pages: [1]
Author Topic: MED17.5.1 Antilag and LC  (Read 5943 times)
R32VAG
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« on: March 31, 2016, 11:02:58 AM »

Hello,

can everyone set me antilag and lc to this ecu?? I will pay for it! It must be not for free!
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: April 01, 2016, 03:43:52 AM »

Hello,

can everyone set me antilag and lc to this ecu?? I will pay for it! It must be not for free!

I would not bother, the TSI engine struggles to cope with life as it is without being blasted to hell with Anti and LC!
Logged
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87


« Reply #2 on: April 01, 2016, 05:06:18 AM »

Yep, friend of me got his 2nd engine now in few years...without any tune on it  Sad
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #3 on: April 01, 2016, 07:18:13 AM »

the TSI engine struggles to cope with life as it is without being blasted to hell with Anti and LC!

I've heard this from a few other people as well. Could you point out some of the weak points?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #4 on: April 02, 2016, 08:31:06 AM »

I've heard this from a few other people as well. Could you point out some of the weak points?

pistons and rings,don't take the heat well
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #5 on: April 02, 2016, 11:47:12 AM »

pistons and rings,don't take the heat well

Thanks. I've been hearing the turbos are weak as well.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
narf0815
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 87


« Reply #6 on: April 03, 2016, 11:53:41 PM »

Hi,
there are problems with the timingchain also...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)