Pages: [1]
Author Topic: 8E0909518AK Immo off please!  (Read 10083 times)
johnnyboy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: April 10, 2016, 07:44:53 PM »

Got a used ecu cause i need to pass emissions but can't figure how to actually do immo off. Thanks!
Logged
Frankenstein86
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #1 on: April 11, 2016, 02:18:53 AM »

Try this.

Logged
johnnyboy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: April 11, 2016, 12:57:11 PM »

I flashed the new bin and immo still kicks in and shuts off the car. I used vag commander v2.5 to read/write.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #3 on: April 11, 2016, 02:10:59 PM »

I flashed the new bin and immo still kicks in and shuts off the car. I used vag commander v2.5 to read/write.

I didn't know you could write to the E2P in the ecu with this.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
johnnyboy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #4 on: April 11, 2016, 02:28:26 PM »

Just found another way to get my original pin for my dash and adapted the ecu to the immobilizer the VCDS way. Thanks anyways!
« Last Edit: April 11, 2016, 08:04:10 PM by johnnyboy » Logged
1gcrazy
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 98


« Reply #5 on: July 20, 2021, 01:53:17 PM »

This file is corrupt. Just for future reference.
Logged
stuydub
Full Member
***

Karma: +24/-12
Offline Offline

Posts: 227


« Reply #6 on: July 21, 2021, 01:10:14 PM »

I flashed the new bin and immo still kicks in and shuts off the car. I used vag commander v2.5 to read/write.

VAG commander wont write the file....thats why it still kicked in
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #7 on: July 24, 2021, 03:54:17 AM »

VAG commander wont write the file....thats why it still kicked in
Hopefully after 5 years he managed it! Smiley
Logged
elektronik13
Full Member
***

Karma: +10/-32
Offline Offline

Posts: 198


« Reply #8 on: May 10, 2022, 03:19:44 PM »

Got a used ecu cause i need to pass emissions but can't figure how to actually do immo off. Thanks!
this file is suitable for garbage
open ecu and read eeprom with programmer
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #9 on: September 05, 2022, 09:18:51 PM »

this file is suitable for garbage
open ecu and read eeprom with programmer
This was 6 years ago.... No one gives a shit
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 18 queries. (Pretty URLs adds 0s, 0q)