Pages: [1]
Author Topic: 2007 BHF 4.2 ST processor...  (Read 5143 times)
keithwbloom
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 43


« on: April 19, 2016, 04:25:47 PM »

So very shocked and saddened about the passing of Mike "Daz" Dillenger. What an incredible person, unselfish to a fault. Tremendous loss for VW/Audi tuning community. Cry

So among the my first conversations with Daz many years ago was a PM where he explained some kinks in a PES tune he did for a C5 S6. I was inquiring about a project seed, a plan to rebuild and modify a second PES Stage 2 setup for the BHF 4.2L.

"Keith, he also has a PES kit. As for the kinks, there are ASM hacks required to get rlsol_w over 100, fkkvs hacks, and a ton of fueling changes. Massive timing scaling, etc. It is a very difficult process. The 2007 is an ST processor. That's going to be next to impossible."

Later he signed on to do the tune on the PES-based MP112 powered setup for my BHF S4 V8. We were discussing using 550cc injectors at 80% duty cycle and we were trading emails and messages for a while, working to assemble the bits and kit I needed to get installation started. And today in retrospect, after spending a day in my workshop swapping rotor packs honoring him in my own way by again setting about the tasks he and I plotted to move forward, I remembered this early message.

What does he mean about the ST processor being an impossibility? He eventually changed his tune (pardon the pun) and related he was going to have to literally build the definitions by hand for the logger, a process he loosely described as akin to sucking balls.

So what's the ST hangup? Why is BHF 2007 edition more of a PITA to remap than the earlier 4.2L versions? It's been a while since I have posted here, but I thought in Daz's memory, I might try to make a more regular appearances and actually try to engineer some of this solution myself.

RIP Daz. You were the walrus. Koo-koo-ka-choo.
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400


« Reply #1 on: April 20, 2016, 01:44:09 AM »

ST10 cpu means that usual ways of logging/disassembly (largely relying on me7info) do not work with it. Meaning most of the job either has to be done by hand or a new tool has to be written. It's not impossible, it just takes a lot of time. I played a little with Porsche 997 ME7.8, which is based on ST10 as well - and its internal "routine" is largely the same as C167 based ME7s. All the offsets are way off, memory structure is different, etc. But it's manageable.
« Last Edit: April 20, 2016, 04:08:20 PM by nubcake » Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039


« Reply #2 on: April 20, 2016, 05:55:08 AM »

I can do this ...

I am not sure I need more work though. Crazy busy.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343


« Reply #3 on: April 20, 2016, 09:54:07 AM »

So very shocked and saddened about the passing of Mike "Daz" Dillenger. What an incredible person, unselfish to a fault. Tremendous loss for VW/Audi tuning community. Cry


RIP Daz. You were the walrus. Koo-koo-ka-choo.

OH MY LORD... WHAT!!!!!!?Huh??  Cry Cry Cry

Logged
keithwbloom
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 43


« Reply #4 on: November 11, 2016, 07:42:01 AM »

I can do this ...

I am not sure I need more work though. Crazy busy.


stripped, primed, and ready for color coat

I am just returning to this after taking another few months off with family distractions. Do you still think you can do this? I am about to ramp up again and need a game plan for injectors and tune to go with MP112 volume on the 4.2. I am near 100% I can get larger blower length to fit, but I may need a custom TB plenum to do it, so I have a little time to start to work on tuning tools. I'll see if I can update my profile to email me when a reply is posted. I had no idea you had responded to my post from April...
« Last Edit: November 11, 2016, 08:06:09 AM by keithwbloom » Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039


« Reply #5 on: November 11, 2016, 10:22:33 AM »

Of course I can.
Not going to be cheap, but I can...

And Daz was right, it is a PITA to do these.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: November 11, 2016, 11:51:06 AM »

Of course I can.
Not going to be cheap, but I can...

And Daz was right, it is a PITA to do these.

I often wonder how a tuner quotes a job like this with a decent amount of unknowns.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039


« Reply #7 on: November 11, 2016, 05:40:36 PM »

I often wonder how a tuner quotes a job like this with a decent amount of unknowns.
I quote a big enough number that it covers most unforeseen circumstances.
That also shows whether someone is serious about it or not.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)