S4 ECU Me7.1.1 in an VR6 24V possible?

Pages: [1]

« previous next »

Author

Topic: S4 ECU Me7.1.1 in an VR6 24V possible? (Read 3996 times)

Jim_Coupe

Hero Member

Karma: +16/-12
Offline

Offline

Posts: 663

	S4 ECU Me7.1.1 in an VR6 24V possible? « on: May 02, 2016, 10:50:15 AM »

Hello, im sure this has been asked b4 but is it possible to run an Audi S4 ECU with 3.2 VR6 24V engine harness? Trigger sensors are probably diffrent?


	Logged

E85oholic

cerips

Full Member

Karma: +3/-2
Offline

Offline

Posts: 118

	Re: S4 ECU Me7.1.1 in an VR6 24V possible? « Reply #1 on: May 02, 2016, 12:44:13 PM »

The S4 has a bank angle of 90 degrees, the VR6 has a bank angle of 15 degrees.


	Logged

Carsinc

Sr. Member

Karma: +17/-2
Offline

Offline

Posts: 447

	Re: S4 ECU Me7.1.1 in an VR6 24V possible? « Reply #2 on: May 02, 2016, 09:23:33 PM »

Quote from: cerips on May 02, 2016, 12:44:13 PM

The S4 has a bank angle of 90 degrees, the VR6 has a bank angle of 15 degrees.

I do not understand what this has to do with it?
I'm pretty sure the crank trigger wheels are different and the cam sensors are also different.
Is this for a forced induction 3.2 motor?


	Logged

Jim_Coupe

Hero Member

Karma: +16/-12
Offline

Offline

Posts: 663

	Re: S4 ECU Me7.1.1 in an VR6 24V possible? « Reply #3 on: May 03, 2016, 12:06:30 AM »

Quote from: Carsinc on May 02, 2016, 09:23:33 PM

Is this for a forced induction 3.2 motor?

Yes im just laborating and experimening some.. Im searching for which engine i shall build in an Audi 90 Coupe RWD rearmounted engine solution. And i have an 3.2T today with NA ECU in my other daily driver. But was curious of the S4 ECU. If one could just adjust and install identical triggers it would probably work. Ive also been laborating with an BMW e36 Ms41.0 for a VR6 and tune it via RomRaider.


	Logged

E85oholic

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: S4 ECU Me7.1.1 in an VR6 24V possible? « Reply #4 on: May 03, 2016, 05:03:14 AM »

http://nefariousmotorsports.com/forum/index.php?action=printpage;topic=8827.0

Already asked.


	Logged

Jim_Coupe

Hero Member

Karma: +16/-12
Offline

Offline

Posts: 663

	Re: S4 ECU Me7.1.1 in an VR6 24V possible? « Reply #5 on: May 03, 2016, 10:48:56 AM »

Quote from: adam- on May 03, 2016, 05:03:14 AM

http://nefariousmotorsports.com/forum/index.php?action=printpage;topic=8827.0

Already asked.

Ahh there it was.. Got it..


	Logged

E85oholic

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 06:55:28 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search