Pages: [1]
Author Topic: Checksum for IAW 8fF.5T  (Read 3903 times)
ziuzio
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: May 06, 2016, 06:56:15 PM »

Hello,
I have a problem with checksum of this Ecu, I've made some tune up with fueling after head porting, recalculated general checksum, but Ecu still don't like it.
Anybody can help:)?
First original file, second after changes.
Logged
Dejw0089
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 51


« Reply #1 on: August 21, 2017, 02:18:26 PM »

Hello,
I have a problem with checksum of this Ecu, I've made some tune up with fueling after head porting, recalculated general checksum, but Ecu still don't like it.
Anybody can help:)?
First original file, second after changes.
You can disable eprom error and it's be fine Smiley
Ill do it everytime Smiley Anyone can tell its wrong but in this ecu i disable it
Logged
woj
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 435


« Reply #2 on: February 26, 2018, 12:26:59 PM »

Another old one, but for completeness, (from memory) word-wise add up range 0x2070 till end, on the factory bin it should add up to 0x55AA. If it does not, manipulate the word at 0xFFBE so that it does.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)