Pages: [1]
Author Topic: Med 9.1 rescue multimap ecu possible?  (Read 7391 times)
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 56


« on: May 11, 2016, 08:58:47 PM »

Hi,

I am trying to generate a med 9.1 ecu with different files for cars that we often have in the garage. So basically my Project is.

- One ecu with immo off
- Maps switch on clutch/speeder so it works on both manual and auto.
- golf GTI 2.0tfsi chipped map
- cupra chipped map
- cupra 350 kit chipped map
- Audi s3 2.0tfsi map

Do you think that would be possible?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: May 11, 2016, 09:07:50 PM »

you want to take 1 ecu and jam 4 different firmwares on to it? did i read that correctly? lol.
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #2 on: May 11, 2016, 09:59:37 PM »

you want to take 1 ecu and jam 4 different firmwares on to it? did i read that correctly? lol.
Dude you read the same thing I did, not just changes, but 4 different everything.
Logged
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 56


« Reply #3 on: May 12, 2016, 12:35:04 AM »

No it is just changes? Why is if 4 different firmwares?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #4 on: May 12, 2016, 08:30:06 AM »

There's not enough room on the ECU for all that. You could potentially have multiple boost duty cycle tables, but you'll never fit in processor code for those different cars. The engines are fundamentally the same. Switchable calibration code should be enough.
Logged
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 56


« Reply #5 on: May 12, 2016, 09:32:33 AM »

But The maps should be The same with different values for different Engine types?
Logged
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 56


« Reply #6 on: May 12, 2016, 09:02:39 PM »

Or am i totally wrong? I mean engines are fundamentally identical right? So it would be different boost, ignition, fuel and maybe some sensors on tur k03 2.0tfsi?
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #7 on: May 12, 2016, 10:16:40 PM »

Ok if you use a single part number, lets say a 115H you could have map switching for a couple of these.
I'm not sure about the auto and man being switchable so why not make the 4 different tunes all built on a
115h all using the same immo off eeprom that way you can just flash the file you want and code to what trans you want.

TBH I'm not sure this could work but I sure think it could.
Logged
sebasapri
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 12



« Reply #8 on: May 22, 2018, 11:42:43 AM »

sounds interesting
Logged
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190


« Reply #9 on: May 23, 2018, 02:14:43 AM »

Solder a BDM header to the ECU and flash it in a few minutes when you change cars.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #10 on: May 23, 2018, 02:39:30 AM »

Hi,

I am trying to generate a med 9.1 ecu with different files for cars that we often have in the garage. So basically my Project is.

- One ecu with immo off
- Maps switch on clutch/speeder so it works on both manual and auto.
- golf GTI 2.0tfsi chipped map
- cupra chipped map
- cupra 350 kit chipped map
- Audi s3 2.0tfsi map

Do you think that would be possible?

a lot of things will not work because the coding is different and coding has to be changed as well, AWD - Cluster etc...But that is the list of your worries....
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)