Pages: [1]
Author Topic: KRKTE calc  (Read 7358 times)
antoffka666
Full Member
***

Karma: +11/-2
Offline Offline

Posts: 82


« on: May 26, 2016, 04:15:03 PM »

Hello ! help calculate KRKTE and all that is necessary for the injector BOSCH 0280150431 (4 bar fuel and  k04-15 (1 bar boost) ) AWT .

Stock KRKTE - 0.10478
Stock injector - BOSCH 0280156065
Logged
J.Laborde
Full Member
***

Karma: +57/-29
Offline Offline

Posts: 82


Tuner and Software Developer


WWW
« Reply #1 on: May 26, 2016, 08:58:35 PM »

Hello ! help calculate KRKTE and all that is necessary for the injector BOSCH 0280150431 (4 bar fuel and  k04-15 (1 bar boost) ) AWT .

Stock KRKTE - 0.10478
Stock injector - BOSCH 0280156065

This is the KRKTE Calculation for an Audi 2.7tt. Please not that for any other engine, all you will need to do is change the (2.671/6) (litres of engine divided by the amount of cylinders) and adjust accordingly. 50.2624 and 0.684 are constants so do not change them. This should give you a pretty close figure. According to your Bosch ID (0280150431) your injectors would run at around 325-330cc/min. This means that your KRKTE for a 2.7 would be:

50.2624*(2.671/6)/(325*0.684)

therefore your KRKTE would be: 0.1006529

Regards
Logged

I am here to learn and help others learn. Smiley

He's a maniac.......MAAAAAANIIIAC
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: May 26, 2016, 09:23:10 PM »

The krkte calc posted for the 2.7t may not apply to all motors.

You can also multiply the stock krkte by the ratio of the old injector flow and the new flow
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
antoffka666
Full Member
***

Karma: +11/-2
Offline Offline

Posts: 82


« Reply #3 on: June 02, 2016, 10:18:05 PM »

Hello ! my value KRKTE for Bosch (0-280-150-431)  = 0.073039  ( selection method )
KVB ~ 380.86
Value in group 32 vsds = (-1.6 , -0,2  ) How can I adjust separately  adaptive and  multiplication correction ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)