Pages: [1]
Author Topic: ead pin from 8n2920980A From 2002 Audi TT  (Read 4694 times)
romripp
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: June 01, 2016, 08:25:27 AM »

Help need to read pin from 8n2920980A From 2002 Audi TT have tried using vag commander,
But the pin it gave me doesn’t work in VCDs  I did a read with vag com  file attatch not sure if its read it properly or not.

thanks in advance  Smiley
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: June 01, 2016, 12:02:26 PM »

dump is bad. also, be very careful before you brick that cluster.
Logged
romripp
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: June 01, 2016, 12:40:58 PM »

dump is bad. also, be very careful before you brick that cluster.

Think i got the correct pin from the ecu for my cluster in the car "5713", file attatched only trouble is, I will not be able to retrieve pin on second hand dash i have bought to replace it, what is the best way to read skc from th ie second hand instrument cluster? got vcds full ver, ebay vag commander and a Chinese car prog.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: June 01, 2016, 12:53:01 PM »

i use carprog on them. it is safest. allows for full backup.
Logged
gmenounos
Newbie
*

Karma: +7/-0
Offline Offline

Posts: 11


« Reply #4 on: February 28, 2021, 10:06:30 AM »

Actually, that original dump was not bad. The SKC (0x1651 = 05713) is the 2 bytes immediately before AUZ5Z0AN160004 in the dump.

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)