Pages: [1]
Author Topic: Audi 2.0 TDI 170 holding back  (Read 4605 times)
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« on: June 09, 2016, 12:14:44 PM »

Hi all

I have a 2012 Audi A4 170bhp  CGLC engine code.

I have recently noticed a small issue when driving the car in the 'sport' mode.   Under higher loads and at random RPMs, the car will hesitate for a split second and then the power delivery will resume.  Almost like you have lifted your foot up a tiny bit and put it down again. 

It doesnt do it with the traction control on, or fully off.  Only the sport mode.

Couple questions.

Does anyone know if the sport button switches any maps in the ECU.

Has anyone ever heard of these issues before?


I initially thought a over boost, but a couple logs show the MAX overboost would be about 40-50hpa since thats what its logged in.  Being a diesel, im unsure what else to log or what blocks it comes under.  No fault codes either.

Chris
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #1 on: June 10, 2016, 02:20:40 AM »

Yes, EDC17 has different maps for driving modes. Not sure what experience folk on this forum have with EDC17, but you're probably best referring back to your tuner. I, personally, have very limited EDC17 experience.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #2 on: June 10, 2016, 02:34:29 AM »

I don't think Chris has it tuned Gman.
Logged
viski_b
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #3 on: June 14, 2016, 10:17:00 AM »

Only different maps are Driving wish maps wich won't  couse such behavior. Try to log mean injection actual boost and rail press. Also next run egt at turbo, particulate filter and maf airmass. We had cases that sticking vnt couse similiar behaviour in such engine (yes i now it's not that old). 170 version run on lower lambda and they run a bit more "dirty" then 140hp version.

Sent from my SM-A510F using Tapatalk
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #4 on: June 15, 2016, 06:10:50 AM »

Only different maps are Driving wish maps wich won't  couse such behavior. Try to log mean injection actual boost and rail press. Also next run egt at turbo, particulate filter and maf airmass. We had cases that sticking vnt couse similiar behaviour in such engine (yes i now it's not that old). 170 version run on lower lambda and they run a bit more "dirty" then 140hp version.

Sent from my SM-A510F using Tapatalk

Perhaps, but if the Sport mode drivers wish requests more torque than the rest, it's likely while trying to produce said desired torque that it'll hit a torque limiter, EGT limiter, smoke limiter etc
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« Reply #5 on: June 26, 2016, 03:00:47 PM »

Sorry for the late reply.  Missed/forgot about this thread.

Totally stock car in terms of tuning.

I can understand the different maps from the drivers wish and driving modes for different settings.  Unfortunately I have zero experience with logging diesel engines or even tuning them.

Like I say, the issue is only very occasional, but there is a noticeable dip in power there.  Granted most people wouldnt feel it, but ive tuned me7 cars before and know how different things adapt the feel of the car and when something isnt working as it should.

Viski_b - do you know what blocks I need to log?  Only get the advanced measuring values on VCDS, and not the normal measuring blocks,  so no idea which blocks relate to what. 

I have heard of one or 2 people mentioning the actuators being a bit weak on these 170 engines.

TBH, sport mode feels no different to the normal driving mode.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)