Pages: [1] 2 3 ... 5
Author Topic: **B7 S4-T Timing Issues**  (Read 35401 times)
q_dubz
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 154



« on: June 09, 2016, 03:43:44 PM »

Hello again all,

This thread is in regards to some timing CF issues i'm experiencing.

I'm seeing timing corrections at IDLE, DECEL, and THROTTLE TIP-IN which of then continue on to WOT but start going down as the revs climb.

This was not the case when the MAF was underscaled but i do believe the timing map was much different then as well. I know because of this issue i see about 5deg less timing up top which is VERY noticeable. The timing map below about 80% load is pretty much stock or a little less for the sake of keeping that V8 down low drivability.

My tuner and I do not have an A2L specific to this ECU nor have found one so the variable locations for the one we do have do not apply. My ECU is as follows:

HWNumber           = "0261208443"
SWNumber           = "1037374043"
PartNumber         = "8E0910560K"
SWVersion          = "0010"
EngineId           = "4.2L V8/5V"

Locating necessary variables hasn't been successful either. (zwist, zwsol, zwbas for example)

I've attached a log of course for review. I forsee needing to have this ECU decompiled in the future Undecided
Logged
q_dubz
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 154



« Reply #1 on: June 09, 2016, 03:48:09 PM »

log
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #2 on: June 09, 2016, 06:12:52 PM »

I've attached a log of course for review. I forsee needing to have this ECU decompiled in the future Undecided

If you expect to add FI to a NA ECU, you had better have the ability to trace ANY variable at will..
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
q_dubz
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 154



« Reply #3 on: June 10, 2016, 04:31:39 AM »

If you expect to add FI to a NA ECU, you had better have the ability to trace ANY variable at will..
Yes, it'd be nice if i had that skill but i dont and there are others that dont. So here i am looking/hoping for help. Undecided
Logged
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343


« Reply #4 on: June 10, 2016, 02:11:52 PM »

Have you looked through my definition file project, may be of some assistance Smiley

http://nefariousmotorsports.com/forum/index.php?topic=8943.0
Logged
q_dubz
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 154



« Reply #5 on: June 10, 2016, 08:27:34 PM »

Have you looked through my definition file project, may be of some assistance Smiley

http://nefariousmotorsports.com/forum/index.php?topic=8943.0
but of course.... Then I found a damos lol
Logged
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343


« Reply #6 on: June 13, 2016, 08:53:21 PM »

but of course.... Then I found a damos lol

Really, is there a DAMOS in existence other than mine for a 4.2 V8 S4?Huh

If so, please post that up if you could.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #7 on: June 13, 2016, 09:45:48 PM »

Really, is there a DAMOS in existence other than mine for a 4.2 V8 S4?Huh

If so, please post that up if you could.

the OP is crazy, there is no damos. Bosch of course never created one. yours is the only one, ever.
Logged
q_dubz
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 154



« Reply #8 on: June 13, 2016, 10:08:01 PM »

*snicker*

 Tongue

The DAMOS isn't in my possession. My tuner has it, i just paid for it. I'll ask if he want's to post it.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #9 on: June 14, 2016, 12:02:25 AM »

The DAMOS isn't in my possession.  i just paid for it. I'll ask if he want's to post it.

I'm going to start asking my clients if they'll buy me definitions.  Grin

But on the real, you should post it up!
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #10 on: June 14, 2016, 05:38:13 AM »

no, he shouldnt post it up.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #11 on: June 14, 2016, 11:01:01 AM »

no, he shouldnt post it up.

lol why? glass bead trading games rofl
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #12 on: June 14, 2016, 11:15:51 AM »

lol why? glass bead trading games rofl

at least you took the time to read all the posts in this thread correctly.  Wink
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #13 on: June 14, 2016, 11:21:34 AM »

at least you took the time to read all the posts in this thread correctly.  Wink

I went from left to right. I even did it twice! What did I miss?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #14 on: June 14, 2016, 11:24:12 AM »

I went from left to right. I even did it twice! What did I miss?

you didnt miss anything, you were there.
Logged
Pages: [1] 2 3 ... 5
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 16 queries. (Pretty URLs adds 0s, 0q)