Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
Can i flash either of these two ECUs with ME7.1?
Pages: [
1
]
« previous
next »
Author
Topic: Can i flash either of these two ECUs with ME7.1? (Read 5536 times)
Dvlax41
Newbie
Karma: +1/-0
Offline
Posts: 12
Can i flash either of these two ECUs with ME7.1?
« on: October 09, 2011, 08:35:04 PM »
i have two spare ECUs on is ecu code : 8D0 907 557P
the other is : 06A 906 018 FB
one is from an 1.8t the other a 2.0L engine, i believe the 1.8t had ME 5.6 (or what ever it was) and the 2.0L had ME 7.5,
will these work on my car if i re flash them or are they going to be un flashable? figure i might try to use some spare ECUs in my garage lol
Logged
Dvlax41
Newbie
Karma: +1/-0
Offline
Posts: 12
Re: Can i flash either of these two ECUs with ME7.1?
« Reply #1 on: October 09, 2011, 08:39:08 PM »
just kidding, the 2.0L one is also 5.9.2 , im thinking i cant do it with either
so if anyone wants them let me know
Logged
vwaudiguy
Hero Member
Karma: +53/-37
Offline
Posts: 2024
Re: Can i flash either of these two ECUs with ME7.1?
« Reply #2 on: October 09, 2011, 09:44:26 PM »
If they work, I wouldn't mind having them as spares or for parts. LMK
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Dvlax41
Newbie
Karma: +1/-0
Offline
Posts: 12
Re: Can i flash either of these two ECUs with ME7.1?
« Reply #3 on: October 09, 2011, 09:55:37 PM »
Yeah they both work no problem, even have the entire engine harness for the 1.8t, the 2l has immo on it though so you would have to deal with that. The 2L was for the aeg engine and the 1.8t was the aeb engine.
Logged
Gonzo
Sr. Member
Karma: +21/-30
Offline
Posts: 483
Re: Can i flash either of these two ECUs with ME7.1?
« Reply #4 on: October 10, 2011, 07:06:01 AM »
Rule of thumb is: Inspect the board to see if they are the same. If so, proceed with flashing
Logged
Dvlax41
Newbie
Karma: +1/-0
Offline
Posts: 12
Re: Can i flash either of these two ECUs with ME7.1?
« Reply #5 on: October 10, 2011, 09:09:31 AM »
would love to inspect the boards, but my ecu in my car has the damn security bolts on it, cant even take it out of the car
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 27, 2024, 08:42:11 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
