Pages: [1]
Author Topic: "general reject"  (Read 9738 times)
skinnytirez
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 15


« on: February 28, 2010, 01:25:22 PM »

So after 2 months of waiting my KWP 2000 cable finally showed up...
I was able to extract my .bin file from my ECU, edit out the O2 sensors and that's where I hit a wall
When trying to flash the edited .bin back to the car in the "progress information" box it starts programming ECU, then displays "general reject" and stops all progress
I have the battery connected to a charger, and the instrument cluster fuses pulled... what am i missing?

thanks for any help

btw i'm using VAG ME7 software
Logged
ArgDub
Full Member
***

Karma: +60/-1
Offline Offline

Posts: 202


« Reply #1 on: March 01, 2010, 05:59:09 PM »

What ecu are you working with? or upload your bin. Try without pulling instrument cluster fuses.



Logged
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 537


« Reply #2 on: March 05, 2010, 10:53:42 AM »

he has an a-box ecu i know this as i was trying to help.  Im pretty clueless as i dont have the ecu here to tinker with.
Logged
ArgDub
Full Member
***

Karma: +60/-1
Offline Offline

Posts: 202


« Reply #3 on: March 07, 2010, 11:33:40 AM »

I have a diferent version of me7 but in my case contrary to what I've read kwp2000 can't write to ecu if I pull the instrument cluster fuses.

also, is a-box compatible with a more popular s4 ecu like m-box?
Logged
robin
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 139


« Reply #4 on: March 07, 2010, 05:54:53 PM »

All you need to do is swap to a Hitachi MAF and you can run M box code.
Logged
ArgDub
Full Member
***

Karma: +60/-1
Offline Offline

Posts: 202


« Reply #5 on: March 07, 2010, 06:17:31 PM »

All you need to do is swap to a Hitachi MAF and you can run M box code.

Can you change MAF linearization table instead?
Logged
robin
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 139


« Reply #6 on: March 18, 2010, 07:34:03 PM »

Not sure, never tried that.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #7 on: May 27, 2010, 01:08:21 PM »

So after 2 months of waiting my KWP 2000 cable finally showed up...
I was able to extract my .bin file from my ECU, edit out the O2 sensors and that's where I hit a wall
When trying to flash the edited .bin back to the car in the "progress information" box it starts programming ECU, then displays "general reject" and stops all progress
I have the battery connected to a charger, and the instrument cluster fuses pulled... what am i missing?

thanks for any help

btw i'm using VAG ME7 software

If this ECU is out of a 2000 S4, then I believe they have a bug in their KWP2000 flashing protocol. I ran into it while testing my own flashing software. You will have to use boot mode.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)