Pages: 1 ... 17 18 [19] 20 21 ... 25
Author Topic: NOTORIOUS VR's M-box Stage 2++ and ALL VARIATIONS. NO NEW THREADS ON THIS.  (Read 264231 times)
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #270 on: January 28, 2014, 05:01:54 PM »

here you have


ME7Check v1.11 (c) mki, 06/2004-07/2011
Checking file 551MSTG2.hitachitest.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 05.12/05.32
-> EPK = 40/1/ME7.1/5/6005.01//22m/DstC2o/011200//
-> Contents of ECUID data table:
   - '0261207143'         (SSECUHN)
   - '1037360857'         (SSECUSN)
   - '8D0907551M  '       (VAG part number)
   - '0002'               (VAG sw number)
   - '2.7l V6/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************


Next time use check sum corrector http://nefariousmotorsports.com/forum/index.php?topic=3347.0title=

Open cmd and type me7sum "bad".bin "good".bin

Logged
carroll1992
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #271 on: January 28, 2014, 05:13:17 PM »

here you have


ME7Check v1.11 (c) mki, 06/2004-07/2011
Checking file 551MSTG2.hitachitest.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 05.12/05.32
-> EPK = 40/1/ME7.1/5/6005.01//22m/DstC2o/011200//
-> Contents of ECUID data table:
   - '0261207143'         (SSECUHN)
   - '1037360857'         (SSECUSN)
   - '8D0907551M  '       (VAG part number)
   - '0002'               (VAG sw number)
   - '2.7l V6/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************


Next time use check sum corrector http://nefariousmotorsports.com/forum/index.php?topic=3347.0title=

Open cmd and type me7sum "bad".bin "good".bin



Thank you very much! Ill give that a go now see if I can get it working! Will attempt to post up logs tomorrow, again thank you very much everyone for all of your help
Logged
cactusgreens4
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 110


« Reply #272 on: January 28, 2014, 05:47:42 PM »

Just a heads up. Not trying to bash anyone but then again we are all here for learning so here it goes. I was going to run adeyspecks's file because I currently run the nvr tune but wanted something with a little more timing and maybe a little more boost since i have larger injectors. yes i know this is not good on k03's blah blah blah yes I know the risk and yes I am prepared if my turbos explode as should anyone be that is interested in tuning or "stages". anyway. that being said. after a little research about adeyspecks's file I came to the conclusion it was not what I wanted because I noticed a thread where a known tuner was saying it was bad based on how it was adjusted. ie. mashing the + button on the timing tables and other things.

http://nefariousmotorsports.com/forum/index.php?topic=3722.0

regards. oh and hi brax Wink
Logged
carroll1992
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #273 on: January 28, 2014, 06:27:25 PM »

Just a heads up. Not trying to bash anyone but then again we are all here for learning so here it goes. I was going to run adeyspecks's file because I currently run the nvr tune but wanted something with a little more timing and maybe a little more boost since i have larger injectors. yes i know this is not good on k03's blah blah blah yes I know the risk and yes I am prepared if my turbos explode as should anyone be that is interested in tuning or "stages". anyway. that being said. after a little research about adeyspecks's file I came to the conclusion it was not what I wanted because I noticed a thread where a known tuner was saying it was bad based on how it was adjusted. ie. mashing the + button on the timing tables and other things.

http://nefariousmotorsports.com/forum/index.php?topic=3722.0

regards. oh and hi brax Wink

Thanks for the heads up. I understand the risks, not really too bothered if it goes tits up as long as I learn from the experience Smiley Ill give it a try and hopefully if it works ill eventually learn how to tweak it correctly to make my car run better! But for now everything's a steep learning curve
Logged
cactusgreens4
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 110


« Reply #274 on: January 29, 2014, 01:05:41 PM »

Thanks for the heads up. I understand the risks, not really too bothered if it goes tits up as long as I learn from the experience Smiley Ill give it a try and hopefully if it works ill eventually learn how to tweak it correctly to make my car run better! But for now everything's a steep learning curve

Let me know what your outcome is. I am indeed interested. Maybe some logs?
Logged
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #275 on: January 31, 2014, 07:18:28 PM »

Anyone know why this file would only get 15psi on a buddy's stage 2+?
Haven't spent the time to pressure test yet... Or log. 

And Aye! What's up! Smiley
Logged

stage 3 b5 S4
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #276 on: January 31, 2014, 07:23:25 PM »

That me7check should have a fix button after you scan it. It works for me.
Logged

stage 3 b5 S4
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #277 on: January 31, 2014, 07:26:29 PM »

Haven't spent the time to pressure test yet... Or log. 


....
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #278 on: January 31, 2014, 07:27:43 PM »

Ha Smiley I know I know.
Logged

stage 3 b5 S4
carroll1992
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #279 on: February 01, 2014, 04:46:00 PM »

Let me know what your outcome is. I am indeed interested. Maybe some logs?
Still waiting on getting the car back up and running before I load the map on, bought some new discs and pads and got given the wrong discs 3 times!!! (Only around 4-5mm difference in height from the originals to the first set I was given) and when I've fitted them its bent the caliper carriers. So going to have to take it to a garage on Monday to get them replaced, the hex bolts are on far to tight, impossible to get off without a set of ramps :/ If only id noticed before I fitted them :@ Hopefully be sorted on Monday and get some videos and logs up!
Logged
carroll1992
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #280 on: February 05, 2014, 12:42:59 PM »

Finally got the map on, car started and just died instantly, didn't sound healthy so put NVR's back on, any suggestions where I've gone wrong?
Also does anyone have NVR's stage 2++ for an Hitachi maf with NLS and Anti Lag/Launch control?

Be much appreciated Cheesy
« Last Edit: February 07, 2014, 04:09:20 PM by carroll1992 » Logged
aysix
Jr. Member
**

Karma: +12/-0
Offline Offline

Posts: 37


« Reply #281 on: February 08, 2014, 02:17:26 AM »

Anyone know why this file would only get 15psi on a buddy's stage 2+?
Haven't spent the time to pressure test yet... Or log. 

And Aye! What's up! Smiley

WOT at 2k RPM and see what it peaks at. It's not going to hit anything over 15 psi at 5k
Logged

Silly Rabbit 6 speed A6
carroll1992
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #282 on: February 09, 2014, 10:02:16 AM »

Finally got it working, car does seem down on power compared to NVR's map, took some logs, ECUxPlot just crashes as soon as I open open the csv file, if anyone could check it over and let me know what you think that would be great!
« Last Edit: February 09, 2014, 01:35:03 PM by carroll1992 » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #283 on: February 09, 2014, 04:24:11 PM »

ECUxPlot just crashes as soon as I open open the csv file

Do you have the latest version? If not, please try it - I have no problem opening your .csv. Please do not report ECUxPlot bugs unless you have verified you have the most recent version.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
carroll1992
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 30


« Reply #284 on: February 10, 2014, 05:00:48 AM »

Do you have the latest version? If not, please try it - I have no problem opening your .csv. Please do not report ECUxPlot bugs unless you have verified you have the most recent version.
I do have the most recent version, I just get this when opening the file with the loading cursor (cant be seen on screenshot)...
And if I click anywhere it just white screens.
Logged
Pages: 1 ... 17 18 [19] 20 21 ... 25
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.05 seconds with 17 queries. (Pretty URLs adds 0.002s, 0q)