I am also looking for this binary, my ECU is flashed and i cant read it with the NefMoto flasher(awesome jobs btw).
But my ECU info says 8E0909518M
0001, would this file work anyway?
Here is info from the flasher:
Reading ECU info.
Reading ECU identification option: ECUIdentificationScalingTable
Successfully read ECU identification information
Reading ECU identification option: systemSupplierECUSoftwareNumber
Read ECU Identification systemSupplierECUSoftwareNumber: 0x3205,
Successfully read ECU identification information
Reading ECU identification option: vehicleManufacturerECUHardwareNumber
Read ECU Identification vehicleManufacturerECUHardwareNumber: 0x0D, 8E0909018 , 0xFF,
Successfully read ECU identification information
Reading ECU identification option: calibrationDate
Read ECU Identification calibrationDate: 8E0909518M , 0001, 0x00002DB5, 0x00010203, 0x0405, , ,
Successfully read ECU identification information
Reading ECU identification option: calibrationEquipmentSoftwareNumber
Read ECU Identification calibrationEquipmentSoftwareNumber: 0x820C0800,
Successfully read ECU identification information
100% complete.
And i got this from tying to valdiate the memory layout:
Validating memory layout.
Requesting security access.
Security access granted.
Validating flash memory starts at 0x00800000 and ends at 0x00840000.
Validation failed, ECU reports RequestUpload service is not supported. RequestUpload may have been disabled by aftermarket engine software.
100% complete.
Validating memory layout failed.
Validation did not complete.
Restoring Windows sleep mode.
