this is more a question of information, as opposed to any type solution.

so i have the bitbox software + rotax module. this flashes through the diag (obd) port.
this works perfect with tactrix openport. i also have this drewtech cable, http://www.drewtech.com/mongoose/isocan2.html, which is described as a j2534 device.
both the openport and mongoose cable seem to work for the same oem softs.
however, when i use the mongoose with bitbox i receive the following error:


i contacted bitbox support to question if this is cable or bitbox issue. they told me to use openport instead. understandable, and is ok solution. i still question the original issue though.

maybe someone here has more information? what are the CAN_ID error meanings?

a screenshot with a bit of data and bench set up attached if interested.

Some flags are vendor specific and i think the error description you get comes from mongoose dll.

Some True J2534 adapters are check many conditions. Openport2 does not make checks, like other True J2534 devices. I suppose, that bitbox software bitbox have some bug in routine connection to CAN bus. Mongoose detect invalid connections parameters, but Openport can't detect this invalid connections parameters. In this case bitbox will work with Openport2, but does not work with True J2534 Mongoose.