Pages: 1 [2] 3 4 ... 7
Author Topic: vw AWP 1.8t ko4xl power cut issue  (Read 65757 times)
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #15 on: July 13, 2016, 04:42:59 PM »

well thanks but a 5120 hack on a 1.8t is much more involved.. i guess ive got more work to do
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #16 on: July 13, 2016, 04:46:33 PM »

nice AFR
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #17 on: July 13, 2016, 05:14:35 PM »

well thanks but a 5120 hack on a 1.8t is much more involved.. i guess ive got more work to do

I'd say stick to running near the MAP limit, and get some good timing.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 401


« Reply #18 on: July 14, 2016, 04:35:03 AM »

Well, this needs 5120 or a "near map limit" tune, yep.
Decrease LDRXN by about 10-15 points and that should bring you to "measurable" boost levels.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #19 on: July 14, 2016, 05:46:10 AM »

nice AFR
Was thinking that.  How is there no knock!?
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 401


« Reply #20 on: July 14, 2016, 06:23:06 AM »

Was thinking that.  How is there no knock!?

Check ps_w. By some lucky coincidence it's juuuuuust riding the limit. So, AFRs remain fairly normal.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #21 on: July 14, 2016, 09:36:34 AM »

Well, this needs 5120 or a "near map limit" tune, yep.
Decrease LDRXN by about 10-15 points and that should bring you to "measurable" boost levels.

req boost is well below the MAP limit, which is why he's seeing throttle cut IIRC.

so he really needs to INCREASE ldrxn and cut a ton of WGDC
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #22 on: July 14, 2016, 10:39:28 AM »

Thank you everybody, I will try a few options I'm going away for the weekend won't be able to test pilot till wednesday, also I think I may swap a oem wastegate on this thing because the cracking pressure is higher, no matter how I adjust the preload.
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 401


« Reply #23 on: July 14, 2016, 01:06:23 PM »

req boost is well below the MAP limit, which is why he's seeing throttle cut IIRC.

so he really needs to INCREASE ldrxn and cut a ton of WGDC

Meh, my bad indeed. Was looking at the rlsol_w when I wrote that (which is well above rl_w) - and completely forgot the fact that pssol is pretty darn low.

Try it "as is" with a stock wastegate and check where your requested and actual boost pressures are. Then start playing with boost PID as outlined in the wiki.
« Last Edit: July 14, 2016, 04:25:50 PM by nubcake » Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #24 on: July 19, 2016, 04:32:12 PM »

here it is, i adjusted the wastegate quite a bit and now boost is much more under control(too much of a pia to swap for oem). spiking and holding 25psi thru the mid range and tapering to 15psi. most importantly no power/boost cut. car rips i think its time to get out to the drag strip for fine tuning im not really comfortable on the street doing long wot blasts...
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #25 on: July 19, 2016, 04:42:15 PM »

here it is, i adjusted the wastegate quite a bit and now boost is much more under control(too much of a pia to swap for oem). spiking and holding 25psi thru the mid range and tapering to 15psi. most importantly no power/boost cut. car rips i think its time to get out to the drag strip for fine tuning im not really comfortable on the street doing long wot blasts...

Still a bit of a hot mess.

You have a HUGE deviation post ramp, you'll still possibly throw limp.

Get req boost closer to map limit, also, your IMAX is proably way too high, your wgdc is really screwed up.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #26 on: July 19, 2016, 07:17:17 PM »

Still a bit of a hot mess.

You have a HUGE deviation post ramp, you'll still possibly throw limp.

Get req boost closer to map limit, also, your IMAX is proably way too high, your wgdc is really screwed up.

I did see a few things I wasn't happy with but for only adjusting the wastegate I'm happy. I only had like 20 mins free today. I will adjust the file tomorrow to get things aligned the way they should be or at least closer.
Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763


« Reply #27 on: July 19, 2016, 08:30:39 PM »

which k04 you running?
Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #28 on: July 19, 2016, 09:10:41 PM »

which k04 you running?
Xspower ko4 xl with billet wheel. Not great but not terrible
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #29 on: July 19, 2016, 11:06:21 PM »

FT F21 CLONE. I USED THE K04-023XL AND IT WAS OK.
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: 1 [2] 3 4 ... 7
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.037 seconds with 17 queries. (Pretty URLs adds 0s, 0q)