Pages: [1]
Author Topic: 1.8T ME7.5 hot start fueling  (Read 5609 times)
Rocky
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 25


« on: July 18, 2016, 11:49:00 AM »

Hi friends

i have hot start problems on 850ccm 1.8T mafless with race camshafts.
i see there is a bit too much starting fuel.

-lambda on idle is near 1.00 but with little misfires. (i know that lambda readings with misfires is not reliable:))
-idle rpm raised to 1000rpm.

i have tried to lower FNSSM with no success..

Regards

Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: July 18, 2016, 12:01:19 PM »

log tmot and tweak KFFWL
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Rocky
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 25


« Reply #2 on: July 20, 2016, 11:26:14 AM »

log tmot and tweak KFFWL

source x TMOT   --->>> GGTFM EIN Motor-Temperatur
source y TMST   --->>> GGTFM EIN Motorstarttemperatur

what is the difference between Motor-Temperatur and Motorstarttemperatur;)

Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #3 on: July 20, 2016, 11:38:30 AM »

One is the temperature when the car was first started, other is tmot (current temp)
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Tshirt2k
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 78


« Reply #4 on: July 24, 2016, 10:24:19 AM »

How long after starting? if within ~50secs there are afterstart tables
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #5 on: August 06, 2016, 09:27:44 AM »

Nice I will also try tweak or "fiddle" wirh this  KFFWL in my 1.8T before the winter comes. my E85 coldstarts suck.
Logged

E85oholic
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #6 on: August 06, 2016, 11:00:36 AM »

How long after starting? if within ~50secs there are afterstart tables

In ME7. 1 it is always used, iirc. I don't know about 7.5
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)