Pages: [1]
Author Topic: EGT question  (Read 2674 times)
yxx499
Full Member
***

Karma: +4/-10
Offline Offline

Posts: 106


« on: July 21, 2016, 01:25:02 AM »

Hi mates,

I own an Seat Leon 1.8T ME7.5 ECU (EU4,Wideband).

because K03S turbo was replaced with an K04-023 that have EGT Probe.

My question is how i can put EGT sensor and wiring to ECU to see real EGT ? I want to see real EGT becasue on K03S i know that EGT model was calculated from lambda ( or i get wrong?)  and is not accurate after an Stage2 tune.

Thanks.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: July 21, 2016, 09:41:02 AM »

Aftermarket EGT sensor/gauge would be the easiest I think. You may be able to use an RS4 one with some asm/software mods, but I don't know anyone who's done this.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)