NefMoto > General > Introductions > Hey guys noob with a 2000 bettle 2.0;) having immo problems
Pages: [1]
« previous next »
Author Topic: Hey guys noob with a 2000 bettle 2.0;) having immo problems  (Read 5493 times)
Pdt8181
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
My car will start then die. I am a mechanic by trade but have no experience with vw. I have a kkl cable on the way from ebay. Tried locksmiths here in meridian ms with no luck. New battery all grounds checked  trying to go immo off then tape the cluster light. I have zed bull and Mitchell on demand-). Thanks in advance for any help!!! Let me know if you need anything
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #1 on: July 21, 2016, 10:58:25 AM »
Look for argdubs tool to read the ecu's e2p. Post it here, and we can immo-off it. Good luck.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pdt8181
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #2 on: July 21, 2016, 11:52:23 AM »
Not familiar with this tool. Is it software I need to download? Where do I find it? Thanks sooo much for your time and help
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: July 21, 2016, 11:53:12 AM »
the "problem" is the cluster. they are shit. immo off will allow the car to start and run. i do tons and tons of these.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #4 on: July 21, 2016, 12:54:38 PM »
Quote from: Pdt8181 on July 21, 2016, 11:52:23 AM
Not familiar with this tool. Is it software I need to download? Where do I find it? Thanks sooo much for your time and help

Yes. Do a search through this forum, and read up. Also, what k0m said is correct. It's usually cold solder joints in the cluster making it not recognize the key cylinder.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447
« Reply #5 on: July 21, 2016, 07:21:57 PM »
I was going to say you can fix those clusters most of the time with a soldering iron.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800
« Reply #6 on: July 21, 2016, 07:39:52 PM »
2000 is aeg need to lift chip to write
Logged
Giving your mom a tuneup
Pdt8181
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #7 on: July 21, 2016, 09:32:27 PM »
Wow you guys are awesome. Quick response time.  This is something I am not used to. I am right on point how much for a supplied ecm immo off can send numbers. Thanks soo much would have wasted my time with the wrong cable software etc... Thank ya! Love MS
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 10:59:20 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)