Help with bdm100 clone

Pages: [1]

« previous next »

Author

Topic: Help with bdm100 clone (Read 7590 times)

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Help with bdm100 clone « on: July 30, 2016, 11:47:24 AM »

I end up getting a bdm clone and I have not have any luck with it being able to read a Bosch med 9.1 from a 2006 vw jetta 2.0tfsi dimsports or cmd will see power. Dose some one have the right pin lay out


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: Help with bdm100 clone « Reply #1 on: July 30, 2016, 01:26:13 PM »

windows 7-32bit ad 64 bit the 32 bit see the drivers as a map3d mpc555 drivers and windows 64 see it as FGtech

this is the info i get every time is... is the red wire on the cable to be pin 1?

Interface communication error (E13)

MPC version error (E06): 0x00000000
Part number error (E05): 0x00000000
Power error or communication error (E14)


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Help with bdm100 clone « Reply #2 on: July 30, 2016, 02:55:55 PM »

Even though I've heard of people getting it to work on 64 with special drivers, I've never been able to. I would suggest sticking with a 32 bit operating system until you get it working reliably.


« Last Edit: August 21, 2016, 12:00:13 PM by vwaudiguy »	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: Help with bdm100 clone « Reply #3 on: July 31, 2016, 03:53:14 AM »

I got it to read the bdm100 I out windows 7-32 bit but I still get that same error on Windows 7 -64-32 bit and windows XP 32 bit how do I update the bdm to v1255 I can't seem to get anything to work and my ecu is good it powered and started the car but the immo is on so I can't use it


	Logged

jastr

Full Member

Karma: +0/-0
Offline

Offline

Posts: 56

	Re: Help with bdm100 clone « Reply #4 on: August 13, 2016, 02:54:00 PM »

I have same problem right now xp 32bit


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: Help with bdm100 clone « Reply #5 on: August 21, 2016, 06:54:01 AM »

What type of ecu you trying to read, I have a bdm 100 clone with the bosch adaptor and it isn't the right pen lay out, need to buy there other type that have one space on the needle pogo's


	Logged

jastr

Full Member

Karma: +0/-0
Offline

Offline

Posts: 56

	Re: Help with bdm100 clone « Reply #6 on: August 21, 2016, 07:21:49 AM »

Would be happy to read that damn ecu. If we could just get the pin layout we could solder to the testpoints


	Logged

birchbark506

Sr. Member

Karma: +11/-11
Offline

Offline

Posts: 414

	Re: Help with bdm100 clone « Reply #7 on: July 28, 2017, 06:12:15 AM »

I got the BDM to finally work after not trying to play with it for some time, i dumped my first files and made my first immo off file and it worked thank you for all who has helped me over the last year


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 19, 2024, 01:37:08 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search