Fuel dropping into 0.75EGT protection on idle

Pages: [1]

« previous next »

Author

Topic: Fuel dropping into 0.75EGT protection on idle (Read 4973 times)

carsey

Sr. Member

Karma: +7/-4
Offline

Offline

Posts: 401

	Fuel dropping into 0.75EGT protection on idle « on: August 01, 2016, 01:32:52 PM »

Hi all

Got a mate who's car isnt running right and overfuelling.

Got him to log it on idle and logged the fuel and Modelled EGT.

After 80-90seconds, the fuel begins to drop off lambda 1 and into .75 EGT protection, obvilously causing a overfuel.

Log is below.

ECU is a 032QN, but running a standard 032HN file.

Any ideas or suggestions?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #1 on: August 01, 2016, 01:37:49 PM »

No MAF signal. Why?

What makes you think it is EGT protection, considering req lambda is flat?

Codes? Trims?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

SB_GLI

Hero Member

Karma: +116/-10
Offline

Offline

Posts: 1022

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #2 on: August 01, 2016, 01:41:07 PM »

I always though ATR enrichment would be seen through lamsoni_w, but perhaps that's not the case.

Try increasing TABGSS/2 to the max values and see if that works. You might want to set CDATR and CDATS as well as CATR to 0.
I do see that tats_w is 1035, so it is definitely a dead EGT sensor.


	Logged

SB_GLI

Hero Member

Karma: +116/-10
Offline

Offline

Posts: 1022

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #3 on: August 01, 2016, 01:48:51 PM »

My reply sucked. Sorry.

What is 032QN? Does this have an EGT sensor from factory?

032HN does not support an egt sensor, so perhaps that's why. But if not, completely disregard my previous post as ATR is not a factor.


	Logged

carsey

Sr. Member

Karma: +7/-4
Offline

Offline

Posts: 401

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #4 on: August 01, 2016, 01:54:19 PM »

032QN doesnt support a EGT sensor, so its not seeing something it shouldnt be.

MAF signal is 0 because of a larger maf housing than what has been mapped for currently.


	Logged

SB_GLI

Hero Member

Karma: +116/-10
Offline

Offline

Posts: 1022

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #5 on: August 01, 2016, 01:58:22 PM »

don't you think you should address the MAF when you have issues with fueling?


	Logged

carsey

Sr. Member

Karma: +7/-4
Offline

Offline

Posts: 401

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #6 on: August 01, 2016, 02:03:17 PM »

Well yeah, but surely that wouldnt cause fuel AFR to drop so low.


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: Fuel dropping into 0.75EGT protection on idle « Reply #7 on: August 01, 2016, 02:11:54 PM »

Quote from: carsey on August 01, 2016, 02:03:17 PM

Well yeah, but surely that wouldnt cause fuel AFR to drop so low.

answers in your logs!

Egtforpartprotection is rising upto 650c

egt sensor data also showing 1035c

suggest maybe a faulty lambda sensor or ecu software isn't compatible with ecu


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 07:44:27 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search