mk3 auq conversion, having problems immo off

Pages: [1]

« previous next »

Author

Topic: mk3 auq conversion, having problems immo off (Read 4868 times)

spannermonkeyboy

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	mk3 auq conversion, having problems immo off « on: August 07, 2016, 01:37:12 PM »

hi everyone,having problems using cmd and argdubs software trying to immo off.never done anything like this before and im lost!
managed to connect nefmoto, got immobiliser not authenticated.
not sure if im in bootmode although when i try , nefmoto wont connect?
struggling using cmd keep getting , system cannot find path specified
im probably doing something wrong!
not sure if its my commands or im not getting into bootmode or something else!


	Logged

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: mk3 auq conversion, having problems immo off « Reply #1 on: August 07, 2016, 04:03:35 PM »

post the command line you use in argdubstool or screenshoot please


	Logged

spannermonkeyboy

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: mk3 auq conversion, having problems immo off « Reply #2 on: August 08, 2016, 08:06:03 AM »

hi thanks for replying, ive tried quite a few variations
C:\Users\scotty>C:\Users\Desktop\me7_95040 --bootmode -r -p 3 95040.bin


	Logged

nubcake

Sr. Member

Karma: +53/-4
Offline

Offline

Posts: 400

	Re: mk3 auq conversion, having problems immo off « Reply #3 on: August 08, 2016, 03:11:56 PM »

Quote from: spannermonkeyboy on August 08, 2016, 08:06:03 AM

hi thanks for replying, ive tried quite a few variations
C:\Users\scotty>C:\Users\Desktop\me7_95040 --bootmode -r -p 3 95040.bin

if cmd prompt is open with "C:\Users\scotty>", try:
cd desktop
press <enter>
me7_95040 --bootmode -r -p 3 95040.bin
<enter> again


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: mk3 auq conversion, having problems immo off « Reply #4 on: August 08, 2016, 03:24:03 PM »

Quote from: spannermonkeyboy on August 08, 2016, 08:06:03 AM

hi thanks for replying, ive tried quite a few variations
C:\Users\scotty>C:\Users\Desktop\me7_95040 --bootmode -r -p 3 95040.bin

So are you going to copy/paste the results so we can answer your question?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: mk3 auq conversion, having problems immo off « Reply #5 on: August 08, 2016, 11:52:42 PM »

How do you know it's port 3? Is the argument R not for read? You don't read in bootmode. Is the ECU even in bootmode?


	Logged

spannermonkeyboy

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: mk3 auq conversion, having problems immo off « Reply #6 on: August 09, 2016, 10:32:30 AM »

Hi everyone, sorry for late reply, I gave up in the end!
Ended up taking eeprom off the board and flashing it using x prog
It starts and runs fine now!


	Logged

turboat

Moderator
Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: mk3 auq conversion, having problems immo off « Reply #7 on: August 09, 2016, 02:34:34 PM »

Quote from: adam- on August 08, 2016, 11:52:42 PM

How do you know it's port 3? Is the argument R not for read? You don't read in bootmode. Is the ECU even in bootmode?

Fairly sure one of my ECUs will only read in bootmode...


	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: mk3 auq conversion, having problems immo off « Reply #8 on: August 10, 2016, 12:01:54 AM »

All the 1.8t ECUs I've read have always read normally booted.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 04:49:49 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search